UPS reporting gone in TrueNAS-SCALE-22.02.4?

[boczar]

Recently had a power outage and a notification from one of my TrueNAS Scale servers that the UPS was on battery power.
So, I went to the reporting screen (where there used to be a UPS option) and noticed it was gone?

Was that an intentional removal or a bug?

 

[thirdgen89gta]

Same issue here. Reports are missing from the Reports tab, but UPSC still reports UPS connectivity, and I can query it to check on UPS status. I also have a APC network card and it reports the same statistics, so I know it is communicating.

I also receive email alerts from TrueNAS when the UPS goes on battery.

Code:

# upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.runtime: 2460
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.0
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion 
device.model: Smart-UPS 1500
device.serial: xxxxxxxxxxxxx  
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/uhid
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: APC HID 0.96
driver.version.internal: 0.41
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: UPS 08.8 / ID=18
ups.mfr: American Power Conversion 
ups.mfr.date: 2013/08/01
ups.model: Smart-UPS 1500
ups.productid: 0003
ups.serial: xxxxxxxxxxxxx
ups.status: OL
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.vendorid: 051d

 

[mikegleasonjr]

Same...

 

[duderuud]

It was removed from upstream. So it is "correct" that it is missing.

(Have the same issue so did some digging)