Could anyone tell me if some additional actions are required to start upsmon working on FreeNAS-9.10.2-U6? The problem is - I tried to start the service via the web interface and it did not work.
Step 1: I connected Ippon Comfo Pro via USB.
Step 2: I got a message GATE ugen7.2: <INNO TECH> at usbus7 i.e. the cable is working and the USB port on the NAS is functioning, right?
Step 3: I set up UPS in Control services via web interface according to the following settings:
UPS mode: master
Identifier: ups
Driver: Ippon ups 2 Back Comfo Pro 600/800 (blazer_usb)
Port: /dev/ugen7.2
ups.conf: empty
upsd.conf: empty
descr: empty
Shutdown mode: low battery
shutdown command: /sbin/shutdown -p now
user: upsmon
pass: *****
Extra users: empty
Remote monitor: yes
Send email status updates: yes
Power off UPS: yes
I push Ok
Step 4 : I start UPS service
I get
Which as far as I understand means some permission problem, which needs to be fixed. Where and how? Thanks.
Step 1: I connected Ippon Comfo Pro via USB.
Step 2: I got a message GATE ugen7.2: <INNO TECH> at usbus7 i.e. the cable is working and the USB port on the NAS is functioning, right?
Step 3: I set up UPS in Control services via web interface according to the following settings:
UPS mode: master
Identifier: ups
Driver: Ippon ups 2 Back Comfo Pro 600/800 (blazer_usb)
Port: /dev/ugen7.2
ups.conf: empty
upsd.conf: empty
descr: empty
Shutdown mode: low battery
shutdown command: /sbin/shutdown -p now
user: upsmon
pass: *****
Extra users: empty
Remote monitor: yes
Send email status updates: yes
Power off UPS: yes
I push Ok
Step 4 : I start UPS service
I get
Code:
Starting nut_upslog in terminal window. And then I start getting the following log: Jan 30 18:00:55 GATE blazer_usb[1904]: Permissions problem: Input/output error Jan 30 18:00:55 GATE upsd[1906]: Can't connect to UPS [ups] (blazer_usb-ups): No such file or directory Jan 30 18:00:58 GATE upsmon[1914]: Poll UPS [ups] failed - Driver not connected Jan 30 18:00:58 GATE upsmon[1914]: Communications with UPS ups lost Jan 30 18:01:03 GATE upsmon[1914]: Poll UPS [ups] failed - Driver not connected
Which as far as I understand means some permission problem, which needs to be fixed. Where and how? Thanks.
Last edited by a moderator: