Brian Blater
Dabbler
- Joined
- Dec 17, 2014
- Messages
- 41
Just finished upgrading my SuperMicro FreeNAS from 9.3 stable to 9.10.1 u3 stable after upgrading IBM m1015 cards to P20. First few times I tried to do the upgrade, the system would never finish the upgrade and reboot right after erasing and reformatting the USB stick. I figured maybe I had bad media, so grabbed another copy of the install media and this time it went through the process to the end.
I rebooted and removed the install media, but every time in gets to loading EM4 network card and after a minute or so it reboots. No idea what the problem is at this point. The system was running fine under 9.3.
System:
SuperMicro dual CPU with 16GB RAM
2 IBM M1015 cards in IT mode
8 @ 1 TB SATA drives
8 @ 1 TB SAS drives
Your help is greatly appreciated as I'm dead in the water now.
Brian
I rebooted and removed the install media, but every time in gets to loading EM4 network card and after a minute or so it reboots. No idea what the problem is at this point. The system was running fine under 9.3.
System:
SuperMicro dual CPU with 16GB RAM
2 IBM M1015 cards in IT mode
8 @ 1 TB SATA drives
8 @ 1 TB SAS drives
Your help is greatly appreciated as I'm dead in the water now.
Brian