commander-flatus
Dabbler
- Joined
- Jan 11, 2014
- Messages
- 13
As a followup to earlier messages. I built a new FreeNAS box with some older drives I had. 2 were giving me errors and after running SMART diagnostics I've realized they're older than I thought (about 3+ years old) and are consistently giving read errors, so I wanted to offline one as directed in the documentation and replace it.
Drive isn't reported as failed, just giving errors and old so I'd rather replace it because I have a new 3TB drive on-hand.
Documentation reference here - http://doc.freenas.org/index.php/Volumes#Replacing_a_Failed_Drive
When I go to the "Volume Status" page, select the appropriate drive and click "Offline", I get this error message:
I'm running a RAID-Z2 with 5x3TB WD Green and Red drives. Everything is put together into one big volume "kegofbeer"
Can anyone help me figure this out or let me know if there's some workaround? Thanks.
Drive isn't reported as failed, just giving errors and old so I'd rather replace it because I have a new 3TB drive on-hand.
Documentation reference here - http://doc.freenas.org/index.php/Volumes#Replacing_a_Failed_Drive
When I go to the "Volume Status" page, select the appropriate drive and click "Offline", I get this error message:
May 2 16:04:19 kegofbeer manage.py: [middleware.exceptions:38] [MiddlewareError: Disk offline failed: "cannot offline gptid/c7714e71-ce24-11e3-9800-d050990137d2: no such device in pool, "]
I'm running a RAID-Z2 with 5x3TB WD Green and Red drives. Everything is put together into one big volume "kegofbeer"
Can anyone help me figure this out or let me know if there's some workaround? Thanks.