gordon19284
Dabbler
- Joined
- Dec 13, 2021
- Messages
- 14
I have my TrueNAS SCALE system connected to an APC Back-UPS Pro 1500VA. I have my UPS connected to TrueNAS via USB, and I have NUT (The UPS service) configured to shut down the server 90 seconds after the UPS goes on battery power. There is a "Power Off UPS" setting. I do not have it checked. Nevertheless, whenever my UPS goes on battery power, after 90 seconds the server shuts down as expected, but also sends the shutoff signal to the UPS, powering it down completely and cutting power to all the less power-hungry devices like my router that I want to stay up.
This is the exact behavior described in this post from 2015: NUT Powers off UPS. In
UPS.conf:
TrueNAS-SCALE-22.02.1
Any idea how I can get TrueNAS to stop shutting down my UPS?
This is the exact behavior described in this post from 2015: NUT Powers off UPS. In
upsmon.conf
, I see the following:Code:
SHUTDOWNCMD "/sbin/shutdown -P now" POWERDOWNFLAG /etc/nokillpower
UPS.conf:
Code:
[ups] driver = usbhid-ups port = auto desc = ""
TrueNAS-SCALE-22.02.1
Any idea how I can get TrueNAS to stop shutting down my UPS?