Hello dear Community,
I try to get TrueNAS SCALE 22.12.3.2 booting from the on the PCI Nmvme over the extension Card QM2-2P2G2T on mz old QNAP NAS TS-453BE there are 16GB RAM installed.
Problem is the QNAP motherboard is not able to see boot device on PCIe Cards, for testing added singl 2,5" SSD to the NAS. bootet from USB installed Truenas but after installation the drive is unvisible during boot.
After booting in tu TruNAS installer all drives are visible !
Only working is installation on USB.
My Question : How to install only the TrueNAS bootloader on the usb stick but use the boot_pool on the Nvme for the OS ?
I try to get TrueNAS SCALE 22.12.3.2 booting from the on the PCI Nmvme over the extension Card QM2-2P2G2T on mz old QNAP NAS TS-453BE there are 16GB RAM installed.
Problem is the QNAP motherboard is not able to see boot device on PCIe Cards, for testing added singl 2,5" SSD to the NAS. bootet from USB installed Truenas but after installation the drive is unvisible during boot.
After booting in tu TruNAS installer all drives are visible !
Only working is installation on USB.
My Question : How to install only the TrueNAS bootloader on the usb stick but use the boot_pool on the Nvme for the OS ?