Hi I just updated to truenas 13 and all jails and I got problem to get wireguard working in jail with kenel support.
I turn on tunebales in freenas if_wg_load; YES , RC tried (I been using guide from this thread https://www.truenas.com/community/t...ion-jail-to-use-wireguard-with-mullvad.90232/) tried create new jail as well still not working.
And when i restarting wireguard service I got this as well after upgade I was using wireguard go for qbtorrent and I got dht nodes no prob now with new version Got connection and its show that is green but 0 dht nodes thats why I think i need to get it through kernel.
[#] rm -f /var/run/wireguard/wg0.sock
[#] resolvconf -d wg0
[#] /usr/local/etc/wireguard/postdown.sh
[#] ifconfig wg create name wg0
[!] Missing WireGuard kernel support (ifconfig: SIOCIFCREATE2: Invalid argument). Falling back to slow userspace implementation.
[#] wireguard-go wg0
┌──────────────────────────────────────────────────────┐
│ │
│ Running wireguard-go is not required because this │
│ kernel has first class support for WireGuard. For │
│ information on installing the kernel module, │
│ please visit: │
│ https://www.wireguard.com/install/ │
│ │
└──────────────────────────────────────────────────────┘
[#] wg setconf wg0 /dev/stdin
[#] ifconfig wg0 inet 10.64.155.116/32 alias
[#] ifconfig wg0 inet6 fc00:bbbb:bbbb:bb01::1:9b73/128 alias
[#] ifconfig wg0 mtu 1420
[#] ifconfig wg0 up
[#] resolvconf -a wg0 -x
[#] route -q -n add -inet6 ::/1 -interface wg0
[#] route -q -n add -inet6 8000::/1 -interface wg0
[#] route -q -n add -inet 0.0.0.0/1 -interface wg0
[#] route -q -n add -inet 128.0.0.0/1 -interface wg0
[#] route -q -n delete -inet 194.37.96.98
[#] route -q -n add -inet 194.37.96.98 -gateway 192.168.1.1
[+] Backgrounding route monitor
I turn on tunebales in freenas if_wg_load; YES , RC tried (I been using guide from this thread https://www.truenas.com/community/t...ion-jail-to-use-wireguard-with-mullvad.90232/) tried create new jail as well still not working.
And when i restarting wireguard service I got this as well after upgade I was using wireguard go for qbtorrent and I got dht nodes no prob now with new version Got connection and its show that is green but 0 dht nodes thats why I think i need to get it through kernel.
[#] rm -f /var/run/wireguard/wg0.sock
[#] resolvconf -d wg0
[#] /usr/local/etc/wireguard/postdown.sh
[#] ifconfig wg create name wg0
[!] Missing WireGuard kernel support (ifconfig: SIOCIFCREATE2: Invalid argument). Falling back to slow userspace implementation.
[#] wireguard-go wg0
┌──────────────────────────────────────────────────────┐
│ │
│ Running wireguard-go is not required because this │
│ kernel has first class support for WireGuard. For │
│ information on installing the kernel module, │
│ please visit: │
│ https://www.wireguard.com/install/ │
│ │
└──────────────────────────────────────────────────────┘
[#] wg setconf wg0 /dev/stdin
[#] ifconfig wg0 inet 10.64.155.116/32 alias
[#] ifconfig wg0 inet6 fc00:bbbb:bbbb:bb01::1:9b73/128 alias
[#] ifconfig wg0 mtu 1420
[#] ifconfig wg0 up
[#] resolvconf -a wg0 -x
[#] route -q -n add -inet6 ::/1 -interface wg0
[#] route -q -n add -inet6 8000::/1 -interface wg0
[#] route -q -n add -inet 0.0.0.0/1 -interface wg0
[#] route -q -n add -inet 128.0.0.0/1 -interface wg0
[#] route -q -n delete -inet 194.37.96.98
[#] route -q -n add -inet 194.37.96.98 -gateway 192.168.1.1
[+] Backgrounding route monitor