non-serviam
Cadet
- Joined
- Jul 20, 2013
- Messages
- 6
My PC:
-----------------------------------------------------------------------------------------------------------------------------------------
Motherboard: Asrock Z77 Pro4-M (8 HDDs connected)
CPU: Intel Core i5 3570K
CPU Cooler: H80i CPU
RAM: 16 GB Corsair Vengeance 1866Mhz
Case: Arc Mini with 3x120mm + 2x140mm fans
SATA Cables: SATA3 Cables from ebay (2 of them are from the Asrock motherboard)
PSU: Corsair HX750
NIC: TP-Link TG-3468 Gigabit PCI Card (my primary NIC)
GPU: Club 3D Radeon HD 7750
Contoller: Trancend SATA II/USB 3 combo (1 ST2000DM001 connected)
HDD: 5x Seagate ST2000DL003 Barracuda Green 3.5-inch 2TB SATA 6 Gb/s Drive (64MB Buffer,5900RPM) and 4x Seagate ST2000DM001 Barracuda 3.5 inch 2TB 7200 RPM 64MB 6GB/S Internal SATA Drive
-----------------------------------------------------------------------------------------------------------------------------------------
My pools keeps giving me errors. I had found this more than a week ago when I first starting using my NAS server with the 9.1.0 having my 9 2TB HDDs on a RAID-Z1. So I run a long SMART test on every drive with Parted Magic that showed that they were all healthy. Reinstalled Freenas 9.1.0, reformatted my HDDs on a 6 drive RAID-z2 and a 3 drive RAID-z1 (with the encryption and initializations option). After I moved many files (CIFS) on the larger pool and I run a scrub it gave me more than 10 errors on each drive (unfortunately I forgot to save the status report). Then I did a zpool clear and after a scrub again and I still got errors:
After moving some more files to the pool:
and then some more files:
So I mounted my other pool (NFS) and while it was empty everything was ok:
but when I moved some files I got more errors:
Room temperature is about 30-35 Celsius.
Disks temperatures:
CPU temp:
The RAM is only recognized as 1600mhz by the motherboard but through the BIOS I "overclocked" to the RAM's stock 1866mhz.
I also checked the sata cables and they appear to be fine and connected properly.
Any suggestions???
-----------------------------------------------------------------------------------------------------------------------------------------
Motherboard: Asrock Z77 Pro4-M (8 HDDs connected)
CPU: Intel Core i5 3570K
CPU Cooler: H80i CPU
RAM: 16 GB Corsair Vengeance 1866Mhz
Case: Arc Mini with 3x120mm + 2x140mm fans
SATA Cables: SATA3 Cables from ebay (2 of them are from the Asrock motherboard)
PSU: Corsair HX750
NIC: TP-Link TG-3468 Gigabit PCI Card (my primary NIC)
GPU: Club 3D Radeon HD 7750
Contoller: Trancend SATA II/USB 3 combo (1 ST2000DM001 connected)
HDD: 5x Seagate ST2000DL003 Barracuda Green 3.5-inch 2TB SATA 6 Gb/s Drive (64MB Buffer,5900RPM) and 4x Seagate ST2000DM001 Barracuda 3.5 inch 2TB 7200 RPM 64MB 6GB/S Internal SATA Drive
-----------------------------------------------------------------------------------------------------------------------------------------
My pools keeps giving me errors. I had found this more than a week ago when I first starting using my NAS server with the 9.1.0 having my 9 2TB HDDs on a RAID-Z1. So I run a long SMART test on every drive with Parted Magic that showed that they were all healthy. Reinstalled Freenas 9.1.0, reformatted my HDDs on a 6 drive RAID-z2 and a 3 drive RAID-z1 (with the encryption and initializations option). After I moved many files (CIFS) on the larger pool and I run a scrub it gave me more than 10 errors on each drive (unfortunately I forgot to save the status report). Then I did a zpool clear and after a scrub again and I still got errors:
Code:
[root@freenas ~]# zpool status VOLUME1 pool: VOLUME1 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 96K in 0h59m with 0 errors on Fri Aug 30 05:41:29 2013 config: NAME STATE READ WRITE CKSUM VOLUME1 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/3b97d721-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/3c6095be-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 1 gptid/3d4226f5-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 1 gptid/3e1f7628-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/3f07c106-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/3feeb788-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 1 errors: No known data errors
After moving some more files to the pool:
Code:
pool: VOLUME1 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 352K in 1h2m with 0 errors on Fri Aug 30 17:40:11 2013 config: NAME STATE READ WRITE CKSUM VOLUME1 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/3b97d721-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 1 gptid/3c6095be-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 1 gptid/3d4226f5-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 3 gptid/3e1f7628-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/3f07c106-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 4 gptid/3feeb788-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 5 errors: No known data errors
and then some more files:
Code:
[root@freenas ~]# zpool status VOLUME1 pool: VOLUME1 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 256K in 1h4m with 0 errors on Fri Aug 30 23:33:27 2013 config: NAME STATE READ WRITE CKSUM VOLUME1 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/3b97d721-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 3 gptid/3c6095be-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 4 gptid/3d4226f5-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 5 gptid/3e1f7628-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 2 gptid/3f07c106-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 5 gptid/3feeb788-0b4d-11e3-b660-f8d111b562f1.eli ONLINE 0 0 8 errors: No known data errors
So I mounted my other pool (NFS) and while it was empty everything was ok:
Code:
[root@freenas ~]# zpool status VOLUME2 pool: VOLUME2 state: ONLINE scan: scrub repaired 0 in 0h0m with 0 errors on Fri Aug 30 16:38:03 2013 config: NAME STATE READ WRITE CKSUM VOLUME2 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/5b263d8d-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/5bb13698-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 gptid/5c360898-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 0 errors: No known data errors
but when I moved some files I got more errors:
Code:
pool: VOLUME2 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 448K in 0h17m with 0 errors on Sat Aug 31 03:44:12 2013 config: NAME STATE READ WRITE CKSUM VOLUME2 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/5b263d8d-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 5 gptid/5bb13698-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 6 gptid/5c360898-0ca9-11e3-b660-f8d111b562f1.eli ONLINE 0 0 4 errors: No known data errors
Room temperature is about 30-35 Celsius.
Disks temperatures:
Code:
ada8 38C Z1E3DEV5 ST2000DM001-1E6164 ada7 38C Z1E3DT2M ST2000DM001-1E6164 ada6 41C Z1E36BCP ST2000DM001-1E6164 ada5 44C 5YD3E176 ST2000DL003-9VT166 ada4 44C 5YD3E8E5 ST2000DL003-9VT166 ada3 43C 5YD3JLCY ST2000DL003-9VT166 ada2 44C 5YD3E8YS ST2000DL003-9VT166 ada1 43C 5YD3GLGP ST2000DL003-9VT166 ada0 38C Z1E3B1J5 ST2000DM001-1CH164
CPU temp:
Code:
dev.cpu.0.temperature: 54.0C dev.cpu.1.temperature: 59.0C dev.cpu.2.temperature: 55.0C dev.cpu.3.temperature: 50.0C
The RAM is only recognized as 1600mhz by the motherboard but through the BIOS I "overclocked" to the RAM's stock 1866mhz.
I also checked the sata cables and they appear to be fine and connected properly.
Any suggestions???