Jonathan Wang
Cadet
- Joined
- Dec 27, 2018
- Messages
- 3
大家好。
我有一个独立供电的双盘位硬盘盒,里面放了两块500G的硬盘,通过USB3.0接口连接到我TureNAS的USB3.0插口
NAS:联想L440笔记本;16G内存;256G SSD 安装 TrueNAS;内置1Tx2 HDD镜像数据池。
问题:系统可以识别两个USB硬盘(/dev/da0、/dev/da1),但是在TrueNAS web管理界面的“磁盘”页面,只显示“da1”,看不到“da0” .
我在命令行:“zpool add droot mirror da0 da1”(droot是我的数据池),我可以扩展两个硬盘作为我的droot的镜像,但是系统会报da1有问题,不能被发现...
我该怎么办?我搜了一下论坛,几乎没有什么有用的信息,一些相关的也是2017年之前的,恐怕不适用于我的情况。
-----------------------------------
Hello everyone.
I have an independent power supply dual-bay hard drive box with two 500G hard drives in it, which are connected to the USB3.0 socket of my TureNAS through the USB3.0 interface.
NAS: Lenovo L440 notebook; 16G memory; 256G SSD with TrueNAS installed; built-in 1Tx2 HDD mirrored data pool.
Problem: The system can recognize two USB hard disks (/dev/da0, /dev/da1), but in the "Disk" page of the TrueNAS web management interface, only "da1" is displayed, but "da0" cannot be seen.
I am on the command line : "zpool add droot mirror da0 da1" (droot is my data pool), I can expand two hard disks as the mirror of my droot, but the system will report that there is a problem with da1 and cannot be found...
What should I do? I searched the forums and there is almost no useful information, some relevant ones are also from before 2017, I am afraid not applicable to my situation.
我有一个独立供电的双盘位硬盘盒,里面放了两块500G的硬盘,通过USB3.0接口连接到我TureNAS的USB3.0插口
NAS:联想L440笔记本;16G内存;256G SSD 安装 TrueNAS;内置1Tx2 HDD镜像数据池。
问题:系统可以识别两个USB硬盘(/dev/da0、/dev/da1),但是在TrueNAS web管理界面的“磁盘”页面,只显示“da1”,看不到“da0” .
我在命令行:“zpool add droot mirror da0 da1”(droot是我的数据池),我可以扩展两个硬盘作为我的droot的镜像,但是系统会报da1有问题,不能被发现...
我该怎么办?我搜了一下论坛,几乎没有什么有用的信息,一些相关的也是2017年之前的,恐怕不适用于我的情况。
-----------------------------------
Hello everyone.
I have an independent power supply dual-bay hard drive box with two 500G hard drives in it, which are connected to the USB3.0 socket of my TureNAS through the USB3.0 interface.
NAS: Lenovo L440 notebook; 16G memory; 256G SSD with TrueNAS installed; built-in 1Tx2 HDD mirrored data pool.
Problem: The system can recognize two USB hard disks (/dev/da0, /dev/da1), but in the "Disk" page of the TrueNAS web management interface, only "da1" is displayed, but "da0" cannot be seen.
I am on the command line : "zpool add droot mirror da0 da1" (droot is my data pool), I can expand two hard disks as the mirror of my droot, but the system will report that there is a problem with da1 and cannot be found...
What should I do? I searched the forums and there is almost no useful information, some relevant ones are also from before 2017, I am afraid not applicable to my situation.
Last edited by a moderator: