OK ive read plenty of threads on how this isn't the best card for truenass however this is strictly a lab environment and i don't intend to store any valuable data or expect high performance.
My issue is i just cant get the card to present any disks to truenas in either conventional raid mode with 8 raid 0 logical drives configured or HBA mode.
I have booted a windows disk in both modes and have cleaned the drives. Still nothing presented.
Camcontrol devlist only shows the disks i have connected to the Sata controller on the server
<KINGSTON SA400S37480G SBFKB1H5> at scbus3 target 0 lun 0 (ada0,pass0)
<AHCI SGPIO Enclosure 2.00 0001> at scbus6 target 0 lun 0 (ses0,pass1)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus7 target 0 lun 0 (ada1,pass2)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus8 target 0 lun 0 (ada2,pass3)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus9 target 0 lun 0 (ada3,pass4)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus10 target 0 lun 0 (ada4,pass5)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus11 target 0 lun 0 (ada5,pass6)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus12 target 0 lun 0 (ada6,pass7)
<AHCI SGPIO Enclosure 2.00 0001> at scbus15 target 0 lun 0 (ses1,pass8)
<Generic- SD/MMC CRW 1.00> at scbus16 target 0 lun 0 (da0,pass9)
pciconf -lv |grep -B 4 -i storage shows:
device = 'C620 Series Chipset Family MROM 0'
ahci0@pci0:0:17:5: class=0x010601 rev=0x09 hdr=0x00 vendor=0x8086 device=0xa1d2 subvendor=0x1590 subdevice=0x00eb
vendor = 'Intel Corporation'
device = 'C620 Series Chipset Family SSATA Controller [AHCI mode]'
class = mass storage
--
class = simple comms
ahci1@pci0:0:23:0: class=0x010601 rev=0x09 hdr=0x00 vendor=0x8086 device=0xa182 subvendor=0x1590 subdevice=0x00eb
vendor = 'Intel Corporation'
device = 'C620 Series Chipset Family SATA Controller [AHCI mode]'
class = mass storage
--
class = base peripheral
none228@pci0:176:0:0: class=0x010400 rev=0x01 hdr=0x00 vendor=0x103c device=0x323b subvendor=0x103c subdevice=0x3353
vendor = 'Hewlett-Packard Company'
device = 'Smart Array Gen8 Controllers'
class = mass storage
So the controller is clearly there. What am i missing?
The server is a HPE DL380 Gen 10 with 256GB Ram and dual Gold 6138 CPUs
The P822 has 8 1.9TB SSD connected. I have also tried conventional 900gb 10K Drives, all HPE
Regards
My issue is i just cant get the card to present any disks to truenas in either conventional raid mode with 8 raid 0 logical drives configured or HBA mode.
I have booted a windows disk in both modes and have cleaned the drives. Still nothing presented.
Camcontrol devlist only shows the disks i have connected to the Sata controller on the server
<KINGSTON SA400S37480G SBFKB1H5> at scbus3 target 0 lun 0 (ada0,pass0)
<AHCI SGPIO Enclosure 2.00 0001> at scbus6 target 0 lun 0 (ses0,pass1)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus7 target 0 lun 0 (ada1,pass2)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus8 target 0 lun 0 (ada2,pass3)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus9 target 0 lun 0 (ada3,pass4)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus10 target 0 lun 0 (ada4,pass5)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus11 target 0 lun 0 (ada5,pass6)
<WDC WDS200T2G0A-00JH30 UP450400> at scbus12 target 0 lun 0 (ada6,pass7)
<AHCI SGPIO Enclosure 2.00 0001> at scbus15 target 0 lun 0 (ses1,pass8)
<Generic- SD/MMC CRW 1.00> at scbus16 target 0 lun 0 (da0,pass9)
pciconf -lv |grep -B 4 -i storage shows:
device = 'C620 Series Chipset Family MROM 0'
ahci0@pci0:0:17:5: class=0x010601 rev=0x09 hdr=0x00 vendor=0x8086 device=0xa1d2 subvendor=0x1590 subdevice=0x00eb
vendor = 'Intel Corporation'
device = 'C620 Series Chipset Family SSATA Controller [AHCI mode]'
class = mass storage
--
class = simple comms
ahci1@pci0:0:23:0: class=0x010601 rev=0x09 hdr=0x00 vendor=0x8086 device=0xa182 subvendor=0x1590 subdevice=0x00eb
vendor = 'Intel Corporation'
device = 'C620 Series Chipset Family SATA Controller [AHCI mode]'
class = mass storage
--
class = base peripheral
none228@pci0:176:0:0: class=0x010400 rev=0x01 hdr=0x00 vendor=0x103c device=0x323b subvendor=0x103c subdevice=0x3353
vendor = 'Hewlett-Packard Company'
device = 'Smart Array Gen8 Controllers'
class = mass storage
So the controller is clearly there. What am i missing?
The server is a HPE DL380 Gen 10 with 256GB Ram and dual Gold 6138 CPUs
The P822 has 8 1.9TB SSD connected. I have also tried conventional 900gb 10K Drives, all HPE
Regards