Saeed A Siddiki
Dabbler
- Joined
- Oct 17, 2012
- Messages
- 22
hey guys! hope everyone is well
(especially on the eastern seaboard!)
i finally managed to finally get everything
docked and ready from the hardware point of
view! that took me a while (sorry novice here so a little slow!)
Corsair Obsidian Series Black 650D Mid Tower Computer Case (CC650DW-1)
MSI Z68A-G43 (G3)- LGA1155 Intel Z68 Express Chipset ATX Desktop Motherboard Core i7/i5/i3 SATA300/600 DDR3 USB3.0 CrossFireX 7.1CH Audio
Syba SD-SATA-4P Serial ATA150 4x Ports RAID Controller Card with SIL3114 Chipset - Retail x 2
Crucial Ballistix Sport 16GB kit (8GBx2) DDR3-1600 1.5V 240-Pin UDIMM BLS2CP8G3D1609DS1S00
Cooler Master Silent Pro Gold (SPG) 1200 Watts Modular Power Supply
Syba SY-CAB40007 Molex 4 Pin to 2x 15 Pin SATA Power Cable (5.5 Inches) x 4
SilverStone CFP52B 5.25-Inch to 3.5-Inch Bay Converter with Hot-Swappable Function (Black)
Silverstone Tek Four-in-One SATA Power Connectors with Power Stabilizing Capacitors (CP06)
Intel Core i3-2120 Dual-Core Processor 3.3 GHz 3 MB Cache LGA 1155 - BX80623I32120
The hard drives are the regular run of the mill in these capacities - green drives and one WD Blue Drive:
4 X 1TB * = *4 TB
3X 2TB*= *6 TB
2X 3TB *= *6 TB
1X * 750GB = *750 GB *
16TB physical*
-3tb overhead (in theory lets say)
i should end up at least with 12 TB OR 10TB ---
BUT WHATS SHOWING under
RAIDZ IS 5.6TB*and
under RAIDZ2 5.3TB
Would appreciate anyone who can further my fruitful exploration before i actually start moving my DATA files on this
bad boy …. cheers
i was reading this post and wonder if i should break things into a 6 and 3 sets etc.
http://www.solarisinternals.com/wik...Configuration_Example_.28x4500_with_raidz2.29
(especially on the eastern seaboard!)
i finally managed to finally get everything
docked and ready from the hardware point of
view! that took me a while (sorry novice here so a little slow!)
Corsair Obsidian Series Black 650D Mid Tower Computer Case (CC650DW-1)
MSI Z68A-G43 (G3)- LGA1155 Intel Z68 Express Chipset ATX Desktop Motherboard Core i7/i5/i3 SATA300/600 DDR3 USB3.0 CrossFireX 7.1CH Audio
Syba SD-SATA-4P Serial ATA150 4x Ports RAID Controller Card with SIL3114 Chipset - Retail x 2
Crucial Ballistix Sport 16GB kit (8GBx2) DDR3-1600 1.5V 240-Pin UDIMM BLS2CP8G3D1609DS1S00
Cooler Master Silent Pro Gold (SPG) 1200 Watts Modular Power Supply
Syba SY-CAB40007 Molex 4 Pin to 2x 15 Pin SATA Power Cable (5.5 Inches) x 4
SilverStone CFP52B 5.25-Inch to 3.5-Inch Bay Converter with Hot-Swappable Function (Black)
Silverstone Tek Four-in-One SATA Power Connectors with Power Stabilizing Capacitors (CP06)
Intel Core i3-2120 Dual-Core Processor 3.3 GHz 3 MB Cache LGA 1155 - BX80623I32120
The hard drives are the regular run of the mill in these capacities - green drives and one WD Blue Drive:
4 X 1TB * = *4 TB
3X 2TB*= *6 TB
2X 3TB *= *6 TB
1X * 750GB = *750 GB *
16TB physical*
-3tb overhead (in theory lets say)
i should end up at least with 12 TB OR 10TB ---
BUT WHATS SHOWING under
RAIDZ IS 5.6TB*and
under RAIDZ2 5.3TB
Would appreciate anyone who can further my fruitful exploration before i actually start moving my DATA files on this
bad boy …. cheers
i was reading this post and wonder if i should break things into a 6 and 3 sets etc.
http://www.solarisinternals.com/wik...Configuration_Example_.28x4500_with_raidz2.29