Donny Davis
Contributor
- Joined
- Jul 31, 2015
- Messages
- 139
I will start by saying I am long time FreeNAS user. Performance has always been top notch, and reliable.
I have two HP dl380 G6 servers with 2x6 core procs, 24GB of ram, 16x 600G sas drives, two 9211 sas hba's, and two mellanox 10GBE cards.
zpool has been in two different configs, two 8 disk zpools in raidz3 and one raidz3 16 disk zpool
The issue I am having is with FreeBSD/NAS 10 where the write and read performance is vastly below that of hardware raid, lvm, and any other configuration.
I am seeing 8mb/s nfs transfer speeds between the two machines for large files(movies), and less for small files 3-4mb/s
With freenas 9.3 I can completely saturate a 1GB link transferring the same files with the same setup. (100-110mb/s)
I would gladly just use FreeNAS 9.3 is mellanox would toss us a bone and make a driver for freebsd 9x
Any ideas what I am doing wrong.
I have two HP dl380 G6 servers with 2x6 core procs, 24GB of ram, 16x 600G sas drives, two 9211 sas hba's, and two mellanox 10GBE cards.
zpool has been in two different configs, two 8 disk zpools in raidz3 and one raidz3 16 disk zpool
The issue I am having is with FreeBSD/NAS 10 where the write and read performance is vastly below that of hardware raid, lvm, and any other configuration.
I am seeing 8mb/s nfs transfer speeds between the two machines for large files(movies), and less for small files 3-4mb/s
With freenas 9.3 I can completely saturate a 1GB link transferring the same files with the same setup. (100-110mb/s)
I would gladly just use FreeNAS 9.3 is mellanox would toss us a bone and make a driver for freebsd 9x
Any ideas what I am doing wrong.