swapinfo

[eim]

according to top on base OS I have 4G swap:

Code:

last pid:  6065;  load averages:  0.56,  0.87,  0.52														   up 0+00:08:27  09:40:44
52 processes:  1 running, 51 sleeping
CPU:  5.9% user,  0.0% nice,  2.0% system,  0.2% interrupt, 92.0% idle
Mem: 2217M Active, 61M Inact, 1781M Wired, 3852M Free
ARC: 977M Total, 120M MFU, 829M MRU, 452K Anon, 15M Header, 12M Other
	 755M Compressed, 1426M Uncompressed, 1.89:1 Ratio
Swap: 4096M Total, 4096M Free

fstab reports:

Code:

freenas-boot/grub	/boot/grub	zfs	rw,noatime	1	0
fdescfs	/dev/fd	fdescfs rw	0 0
/dev/mirror/swap0.eli	none	swap	sw	0	0
/dev/mirror/swap1.eli	none	swap	sw	0	0

other:

Code:

dmesg | grep GEOM
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:	 Crypto: software
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:	 Crypto: software

 

[Chris Moore]

We asked about this, did it change? That is what you are supposed to have.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[MrToddsFriends]

So top reports the expected amount of swap while swapinfo does not. One more reason to check the integrity of your boor medium/media. Are you using a single USB stick? If the integrity checks reveal no errors a bug report is a good idea, as danb35 already mentioned.