SuperMicro A2SDI-4C-HLN4F Sata configs

[bdacasc]

Please Advice me
I am doing some thing wrong here I do not know what
My system can not detect the 18 tb disk in SATA1
But they are seen in any of the SATA0

Here is my setup:
One SuperMicro A2SDI-4C-HLN4F
5 WDC 8 TB disks WD80Efax
1 Samsung boot SSD
2 18 TB WD181KFGX

I have got the latest Bios from Supermicro. 1.7

When I look in the Sata Config in the bios I can see
Sata 0
Sata 1

Looking in the Sata0 (from the menu in the bios)
I see :
I-Sata4 (WDC WD80EFAX is detected)
I-Sata5 (WDC WD80EFAX is detected)
I-Sata6 (WDC WD80EFAX is detected)
I-Sata7 (WDC WD80EFAX is detected)
And the system detects all my drives WDC WD80EFAX

In Sata 1
I see:
I-Sata0 (WDC WD80EFAX is detected)
I-Sata1 (Samsung 870 E Boot)
I-Sata2 Nothing
I-Sata3 Nothing
I-Sata (M.2) Nothing

I am rather sure that my 2 18 TB WD181KFGX is located in Sata1s -I-Sata2 and Sata3 but it can not be detected.

Then I remove the boot disk and then took out 2 of the 8 tb Disks and but my new 18 TB disk in the those slots.
Then went in to the bios to see if it was reconginised.....
And YES! There they where. I can see them in any of Sata0 but not in Sata1.

Why is this ?
What is it that I do not doing correct here ?

What is my path here ?
Please Command, me dark lords