LtHaus
Dabbler
- Joined
- Apr 21, 2020
- Messages
- 31
Brand new drive, doing 'burn-in.sh'. its not done but I don't know if there is something to do or just call WD.
Finished SMART extended test on drive /dev/da4: Fri May 15 21:01:20 CDT 2020
+-----------------------------------------------------------------------------
+ Run badblocks test on drive /dev/da4: Fri May 15 21:01:20 CDT 2020
+-----------------------------------------------------------------------------
Checking for bad blocks in read-write mode
From block 0 to 976754645
Testing with pattern 0xaa: set_o_direct: Inappropriate ioctl for device
done
Reading and comparing: done
Testing with pattern 0x55: 22.32% done, 21:37:11 elapsed. (0/20588/68 errors)
Finished SMART extended test on drive /dev/da4: Fri May 15 21:01:20 CDT 2020
+-----------------------------------------------------------------------------
+ Run badblocks test on drive /dev/da4: Fri May 15 21:01:20 CDT 2020
+-----------------------------------------------------------------------------
Checking for bad blocks in read-write mode
From block 0 to 976754645
Testing with pattern 0xaa: set_o_direct: Inappropriate ioctl for device
done
Reading and comparing: done
Testing with pattern 0x55: 22.32% done, 21:37:11 elapsed. (0/20588/68 errors)