I've been using my FreeNAS as a simple NAS and it just stopped working today. Initial error I received was The volume (name) state is UNKNOWN. I had my drives set up in RAID 10. It looks like one or both of the drives failed from one of them mirrors. I can't get FreeNAS to recognize them. I tried installing 2 more drives I've had to let the RAID rebuild but I'm still getting the same error. Any help is appreciated.
zpool import
gpart show
zpool status
camcontrol devlist
glabel status
Let me know if I can provide any other outputs.
Thanks
zpool import
Code:
# zpool import pool: ShawNAS id: 9292854171455997109 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://illumos.org/msg/ZFS-8000-6X config: ShawNAS UNAVAIL missing device mirror-1 ONLINE gptid/e298bcba-6a30-11e5-ab72-d05099592946 ONLINE gptid/e319310f-6a30-11e5-ab72-d05099592946 ONLINE Additional devices are known to be part of this pool, though their exact configuration cannot be determined.
gpart show
Code:
# gpart show => 63 4294967232 ada0 MBR (2.7T) 63 4294967232 - free - (2.0T) => 63 4294967232 ada1 MBR (2.7T) 63 4294967232 - free - (2.0T) => 34 5860533101 ada2 GPT (2.7T) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 5856338696 2 freebsd-zfs (2.7T) 5860533128 7 - free - (3.5K) => 34 5860533101 ada3 GPT (2.7T) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 5856338696 2 freebsd-zfs (2.7T) 5860533128 7 - free - (3.5K) => 34 62333885 da2 GPT (30G) 34 1024 1 bios-boot (512K) 1058 6 - free - (3.0K) 1064 62332848 2 freebsd-zfs (30G) 62333912 7 - free - (3.5K)
zpool status
Code:
# zpool status pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h6m with 0 errors on Sun Sep 30 03:51:06 2018 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da2p2 ONLINE 0 0 0 errors: No known data errors
camcontrol devlist
Code:
# camcontrol devlist <WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (pass0,ada0) <WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 0 lun 0 (pass1,ada1) <ST3000DM001-1ER166 CC26> at scbus2 target 0 lun 0 (pass2,ada2) <ST3000DM001-1ER166 CC26> at scbus3 target 0 lun 0 (pass3,ada3) <Generic Compact Flash 0.00> at scbus5 target 0 lun 0 (pass4,da0) <Generic SD/MMC 0.00> at scbus5 target 0 lun 1 (pass5,da1) <Generic microSD 0.00> at scbus5 target 0 lun 2 (pass6,da2) <Generic MS/MS-PRO 0.00> at scbus5 target 0 lun 3 (pass7,da3) <Generic SM/xD-Picture 0.00> at scbus5 target 0 lun 4 (pass8,da4)
glabel status
Code:
# glabel status Name Status Components gptid/e27e1e12-6a30-11e5-ab72-d05099592946 N/A ada2p1 gptid/e298bcba-6a30-11e5-ab72-d05099592946 N/A ada2p2 gptid/e2ff10f9-6a30-11e5-ab72-d05099592946 N/A ada3p1 gptid/e319310f-6a30-11e5-ab72-d05099592946 N/A ada3p2 gptid/adf8b63f-6a6a-11e5-8f64-d05099592946 N/A da2p1
Let me know if I can provide any other outputs.
Thanks