Pharfar
Dabbler
- Joined
- Jan 6, 2013
- Messages
- 46
I have a FreeNAS box running with Constellation ST1000NM0011 drives. The drives are good, but when they are in standby, I get an error when probing powermode.
When the drives are not in standby, I get this:
Any input on this behaviour? Is is OK or really, really bad? I have rechecked cables, even replaced cables, but with no effect.
Motherboard is an Intel DH77DF, controller IBM ServeRAID M1015, cross flashed to a LSI9211-8i in IT mode.
Please read and comply with the rules or you may be temporarily banned.
You can edit your post and add/fix content or the Title.
Posts not meeting requirements and not updated may be deleted in 24 hours or sooner (Rule #4).
http://forums.freenas.org/showthread.php?1-Forum-Rules
Code:
smartctl -n standby /dev/da3 smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 amd64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net ataCheckPowerMode(): ATA CHECK POWER MODE returned unknown Sector Count Register value 81 CHECK POWER MODE returned unknown value 0x81, ignoring -n option ATA device successfully opened Use 'smartctl -a' (or '-x') to print SMART (and more) information
When the drives are not in standby, I get this:
Code:
smartctl -n standby /dev/da3 smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 amd64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Device is in ACTIVE or IDLE mode
Any input on this behaviour? Is is OK or really, really bad? I have rechecked cables, even replaced cables, but with no effect.
Motherboard is an Intel DH77DF, controller IBM ServeRAID M1015, cross flashed to a LSI9211-8i in IT mode.
Code:
Smart data === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES (SATA 6Gb/s) Device Model: ST1000NM0011 Serial Number: HAL9000 LU WWN Device Id: 5 000c50 04ffd98df Firmware Version: SN03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sat Mar 9 08:50:17 2013 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 147) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 069 044 Pre-fail Always - 222845178 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 338527 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 43 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 3 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 078 073 045 Old_age Always - 22 (Min/Max 21/25) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 141 194 Temperature_Celsius 0x0022 022 040 000 Old_age Always - 22 (0 19 0 0 0) 195 Hardware_ECC_Recovered 0x001a 119 100 000 Old_age Always - 222845178 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Please read and comply with the rules or you may be temporarily banned.
You can edit your post and add/fix content or the Title.
Posts not meeting requirements and not updated may be deleted in 24 hours or sooner (Rule #4).
http://forums.freenas.org/showthread.php?1-Forum-Rules