I have a freenas-boot / stripe / da6p2 boot device (usb stick) working correctly.
I have inserted a new USB device "da5" correctly detected (note: I tried all USB ports of my computer).
Using the GUI, I click the Attach button, choose my da5 disk, check the use full disk option, validate and after a few second, the GUI says that everything went fine but my disk is not attached.
I tried the command line version:
The disk is attached, the mirror is created, the resilvering is done (this is why my glabel status displays the p1 and p2 partitions now in the above command), I also issued the following command as advised:
but, when I reboot the machine, it tries to boot on da5 by default and I have a message like "non system disk"
I detached the disk and reattached it (I saw this elsewhere) using the GUI, but the operation is still successfull without doing anything.
Nothing written in /var/log/messages
I am using 11.1U6, I have done the exact same operation on 2 other machines without any trouble, one of them is the same hardware.
I have so 2 issues:
- the GUI does not react as expected
- the command line works except for the boot (maybe I am just missing something)
Thanks for your help
I have inserted a new USB device "da5" correctly detected (note: I tried all USB ports of my computer).
Code:
glabel status returns (I removed other disks): gptid/a0daaf02-7e84-11e6-a889-78e3b5ce431f N/A da6p1 gptid/a0e11c7e-7e84-11e6-a889-78e3b5ce431f N/A da6p2 gptid/3fc20d90-ecd5-11e8-adeb-00232431860d N/A da5p1 gptid/3fff812e-ecd5-11e8-adeb-00232431860d N/A da5p2
Using the GUI, I click the Attach button, choose my da5 disk, check the use full disk option, validate and after a few second, the GUI says that everything went fine but my disk is not attached.
I tried the command line version:
Code:
zpool attach freenas-boot gptid/a0e11c7e-7e84-11e6-a889-78e3b5ce431f gptid/a8338bbf-ecbe-11e8-8a2a-00232431860d
The disk is attached, the mirror is created, the resilvering is done (this is why my glabel status displays the p1 and p2 partitions now in the above command), I also issued the following command as advised:
Code:
gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da5
but, when I reboot the machine, it tries to boot on da5 by default and I have a message like "non system disk"
I detached the disk and reattached it (I saw this elsewhere) using the GUI, but the operation is still successfull without doing anything.
Nothing written in /var/log/messages
I am using 11.1U6, I have done the exact same operation on 2 other machines without any trouble, one of them is the same hardware.
I have so 2 issues:
- the GUI does not react as expected
- the command line works except for the boot (maybe I am just missing something)
Thanks for your help