Rich_B
Cadet
- Joined
- Dec 7, 2014
- Messages
- 4
Hello.
I Have tried searching for the answer, but i never seem to find what i'm looking for - maybe somebody could give me some pointers.
I'm running 11.1-u6 system spec is as follows :-
i3 7100 3.9Ghz
16gb DDR4
7x 2tb 7200rpm WD attached via an LSI SAS 9211-8i HBA flashed to IT mode - RaidZ1
Dual port Intel X520-T2 10Gbe
Single Port Intel Gigabit NIC
If it makes a difference Freenas is installed onto a 60gb SATA SSD
Network cabling around my home is BrandRex Cat6. I have the Freenas box attached to a gigabit switch, and one of the ports on the 10Gbe card directly attached to my PC - 40m away and showing a 10gig connection.
The main drive on my PC is a 500gb Samsung M.2 960 Pro, so ample to feed the network.
Pulling files of various sizes off the server to my PC quickly runs up to 420mb/sec (reported by windows 10) and just sits there, rock solid until its complete. However, sending stuff to Freenas from my PC quickly jumps upto 400mb/sec, holds for about 20sec then drops like a stone (10-20mb/sec) and slowly builds back up to about 150mb/sec..
Does this sound like the issue could be with Freenas or my PC? I cant test another machine as its the only 10Gbe capable machine in the house - When I was just running gigabit it would max out the connection at 112mb/sec in both directions.
Sorry to ramble on!
Kind Regards.
I Have tried searching for the answer, but i never seem to find what i'm looking for - maybe somebody could give me some pointers.
I'm running 11.1-u6 system spec is as follows :-
i3 7100 3.9Ghz
16gb DDR4
7x 2tb 7200rpm WD attached via an LSI SAS 9211-8i HBA flashed to IT mode - RaidZ1
Dual port Intel X520-T2 10Gbe
Single Port Intel Gigabit NIC
If it makes a difference Freenas is installed onto a 60gb SATA SSD
Network cabling around my home is BrandRex Cat6. I have the Freenas box attached to a gigabit switch, and one of the ports on the 10Gbe card directly attached to my PC - 40m away and showing a 10gig connection.
The main drive on my PC is a 500gb Samsung M.2 960 Pro, so ample to feed the network.
Pulling files of various sizes off the server to my PC quickly runs up to 420mb/sec (reported by windows 10) and just sits there, rock solid until its complete. However, sending stuff to Freenas from my PC quickly jumps upto 400mb/sec, holds for about 20sec then drops like a stone (10-20mb/sec) and slowly builds back up to about 150mb/sec..
Does this sound like the issue could be with Freenas or my PC? I cant test another machine as its the only 10Gbe capable machine in the house - When I was just running gigabit it would max out the connection at 112mb/sec in both directions.
Sorry to ramble on!
Kind Regards.