HarambeLives
Contributor
- Joined
- Jul 19, 2021
- Messages
- 153
Maybe I just need more coffee, but where on earth do I view the actual results?
Storage > Pools > Status shows all drives online and good
Disks > da10 > Dropdown > SMART Test Results doesn't seem to show me any results. Am I missing something here? this is what I see
So I went into CLI and figured I could maybe see the results there, but still no
I can see there that it failed on segment 3, but what the heck is segment 3? Is there a way to drill down further?
Storage > Pools > Status shows all drives online and good
Disks > da10 > Dropdown > SMART Test Results doesn't seem to show me any results. Am I missing something here? this is what I see
So I went into CLI and figured I could maybe see the results there, but still no
Code:
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HGST Product: H7280A520SUN8.0T Revision: PAG1 Compliance: SPC-4 User Capacity: 7,865,536,647,168 bytes [7.86 TB] Logical block size: 512 bytes Physical block size: 4096 bytes Formatted with type 1 protection 8 bytes of protection information per logical block LU is fully provisioned Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000cca260bd5228 Serial number: 001649PB3R5V VLKB3R5V Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Sat Oct 15 09:18:21 2022 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 36 C Drive Trip Temperature: 85 C Accumulated power on time, hours:minutes 45940:36 Manufactured in week 49 of year 2016 Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 37 Specified load-unload count over device lifetime: 600000 Accumulated load-unload cycles: 1940 Elements in grown defect list: 0 Vendor (Seagate Cache) information Blocks sent to initiator = 21759842658025472 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 23 0 23 18569405 1390483.328 0 write: 0 13 0 13 12180425 902791.191 0 verify: 0 0 0 0 84772 1.273 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Failed in segment --> 3 45931 - [0x1 0x5d 0xfd] # 2 Background short Completed - 45907 - [- - -] # 3 Background short Completed - 45883 - [- - -] # 4 Background short Completed - 45859 - [- - -] # 5 Background short Completed - 45835 - [- - -] # 6 Background short Completed - 45811 - [- - -] # 7 Background short Completed - 45787 - [- - -] # 8 Background short Completed - 45763 - [- - -] # 9 Background short Completed - 45739 - [- - -] #10 Background short Completed - 45715 - [- - -] #11 Background short Completed - 45691 - [- - -] #12 Background short Completed - 45667 - [- - -] #13 Background short Completed - 45643 - [- - -] #14 Background short Completed - 45619 - [- - -] #15 Background short Completed - 45595 - [- - -] #16 Background short Completed - 45571 - [- - -] #17 Background short Completed - 45547 - [- - -] #18 Background short Completed - 45523 - [- - -] #19 Background short Completed - 45499 - [- - -] #20 Background short Completed - 45475 - [- - -] Long (extended) Self-test duration: 63865 seconds [1064.4 minutes]
I can see there that it failed on segment 3, but what the heck is segment 3? Is there a way to drill down further?