Hello :)
I need some help to analyze my SMART issue.
Multi_Zone_Error_Rate increased to 1 and I got read failure on the same block.
What can I do ?
I think my disk is not dying right now, so I dont want to change it immediatly, I would like to see how situation will evolve.
What you guys will do in my case ?
Thank you very much !
I need some help to analyze my SMART issue.
Code:
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 210 194 021 Pre-fail Always - 8458 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 135 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 047 047 000 Old_age Always - 39250 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 135 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 71 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 403 194 Temperature_Celsius 0x0022 122 107 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
Code:
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 70% 39250 2941213240 # 2 Short offline Completed without error 00% 39242 - # 3 Short offline Completed without error 00% 39218 - # 4 Short offline Completed without error 00% 39211 - # 5 Extended offline Completed: read failure 70% 39202 2941213240 # 6 Extended offline Completed: read failure 70% 39197 2941213240 # 7 Short offline Completed without error 00% 39194 - # 8 Short offline Completed without error 00% 39170 - # 9 Short offline Completed without error 00% 39146 - #10 Short offline Completed without error 00% 39122 - #11 Short offline Completed without error 00% 39098 - #12 Short offline Completed without error 00% 39074 - #13 Short offline Completed without error 00% 39050 - #14 Extended offline Completed without error 00% 39040 - #15 Short offline Completed without error 00% 39026 - #16 Short offline Completed without error 00% 39007 - #17 Short offline Completed without error 00% 38978 - #18 Short offline Completed without error 00% 38954 - #19 Short offline Completed without error 00% 38930 - #20 Short offline Completed without error 00% 38906 - #21 Short offline Completed without error 00% 38882 -
Code:
# zpool status pool: tank1 state: ONLINE scan: scrub repaired 0B in 0 days 07:09:21 with 0 errors on Sun Dec 13 07:33:23 2020 config: NAME STATE READ WRITE CKSUM tank1 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 wwn-0x50014ee20bf1ec46 ONLINE 0 0 0 wwn-0x50014ee260ef9e04 ONLINE 0 0 0 wwn-0x50014ee2b7f67b03 ONLINE 0 0 0 wwn-0x50014ee26644a141 ONLINE 0 0 0 wwn-0x50014ee210ef4eac ONLINE 0 0 0 wwn-0x50014ee2bb9a531b ONLINE 0 0 0 wwn-0x50014ee26644a083 ONLINE 0 0 0
Multi_Zone_Error_Rate increased to 1 and I got read failure on the same block.
What can I do ?
I think my disk is not dying right now, so I dont want to change it immediatly, I would like to see how situation will evolve.
What you guys will do in my case ?
Thank you very much !