Hello,
I just received an alert with subject message. This is one drive from my 4 drive total raidz2 pool. Each drive is 1TB in size. Below is smartctl output. Warranty time is over.
My skill for understanding smartctl is not good enough for giving a decision myself. I wonder if I must replace that drive.
I was thinking about increasing my pool to 4x4TB drives for a while. But, I still need sometime to save some more money for that.
Thanks & Regards,
Ertan
I just received an alert with subject message. This is one drive from my 4 drive total raidz2 pool. Each drive is 1TB in size. Below is smartctl output. Warranty time is over.
My skill for understanding smartctl is not good enough for giving a decision myself. I wonder if I must replace that drive.
I was thinking about increasing my pool to 4x4TB drives for a while. But, I still need sometime to save some more money for that.
Thanks & Regards,
Ertan
root@freenas[~]# smartctl -x /dev/ada1
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: xxxxxxxxxxxxxxx
LU WWN Device Id: 5 0014ee 2b9dedae8
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Oct 1 13:42:59 2020 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 115) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (14280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 137 136 021 - 4133
4 Start_Stop_Count -O--CK 100 100 000 - 133
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 11869
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 133
192 Power-Off_Retract_Count -O--CK 200 200 000 - 58
193 Load_Cycle_Count -O--CK 200 200 000 - 199
194 Temperature_Celsius -O---K 095 090 000 - 48
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 30% 11869 1565210488
# 2 Short offline Completed without error 00% 11856 -
# 3 Short offline Completed without error 00% 11845 -
# 4 Short offline Completed without error 00% 11821 -
# 5 Extended offline Completed without error 00% 11811 -
# 6 Short offline Completed without error 00% 11797 -
# 7 Short offline Completed without error 00% 11773 -
# 8 Short offline Completed without error 00% 11749 -
# 9 Short offline Completed without error 00% 11725 -
#10 Short offline Completed without error 00% 11701 -
#11 Short offline Completed without error 00% 11677 -
#12 Short offline Completed without error 00% 11667 -
#13 Short offline Completed without error 00% 11643 -
#14 Short offline Completed without error 00% 11619 -
#15 Extended offline Completed without error 00% 11609 -
#16 Short offline Completed without error 00% 11595 -
#17 Short offline Completed without error 00% 11571 -
#18 Short offline Completed without error 00% 11547 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: 26/49 Celsius
Lifetime Min/Max Temperature: 24/52 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (62)
Index Estimated Time Temperature Celsius
63 2020-10-01 05:45 49 ******************************
... ..( 15 skipped). .. ******************************
79 2020-10-01 06:01 49 ******************************
80 2020-10-01 06:02 48 *****************************
... ..( 3 skipped). .. *****************************
84 2020-10-01 06:06 48 *****************************
85 2020-10-01 06:07 44 *************************
... ..(342 skipped). .. *************************
428 2020-10-01 11:50 44 *************************
429 2020-10-01 11:51 45 **************************
... ..( 2 skipped). .. **************************
432 2020-10-01 11:54 45 **************************
433 2020-10-01 11:55 46 ***************************
... ..( 6 skipped). .. ***************************
440 2020-10-01 12:02 46 ***************************
441 2020-10-01 12:03 47 ****************************
... ..( 6 skipped). .. ****************************
448 2020-10-01 12:10 47 ****************************
449 2020-10-01 12:11 48 *****************************
... ..( 16 skipped). .. *****************************
466 2020-10-01 12:28 48 *****************************
467 2020-10-01 12:29 49 ******************************
... ..( 72 skipped). .. ******************************
62 2020-10-01 13:42 49 ******************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 133 --- Lifetime Power-On Resets
0x01 0x010 4 11869 --- Power-on Hours
0x01 0x018 6 25506218939 --- Logical Sectors Written
0x01 0x020 6 531274404 --- Number of Write Commands
0x01 0x028 6 38686903805 --- Logical Sectors Read
0x01 0x030 6 170759989 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 11801 --- Spindle Motor Power-on Hours
0x03 0x010 4 11692 --- Head Flying Hours
0x03 0x018 4 258 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 2 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 48 --- Current Temperature
0x05 0x010 1 43 --- Average Short Term Temperature
0x05 0x018 1 45 --- Average Long Term Temperature
0x05 0x020 1 53 --- Highest Temperature
0x05 0x028 1 22 --- Lowest Temperature
0x05 0x030 1 47 --- Highest Average Short Term Temperature
0x05 0x038 1 34 --- Lowest Average Short Term Temperature
0x05 0x040 1 45 --- Highest Average Long Term Temperature
0x05 0x048 1 36 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 566 --- Number of Hardware Resets
0x06 0x010 4 273 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 58461 Vendor specific
root@freenas[~]# zpool import
root@freenas[~]# zpool status
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:00:10 with 0 errors on Thu Oct 1 03:45:10 2020
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
nvd0p2 ONLINE 0 0 0
errors: No known data errors
pool: pool
state: ONLINE
scan: scrub repaired 0 in 0 days 02:09:43 with 0 errors on Sun Aug 23 06:09:45 2020
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/2ab5e31f-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2c61d427-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2e1f7ea9-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2fdfa8a8-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
errors: No known data errors
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: xxxxxxxxxxxxxxx
LU WWN Device Id: 5 0014ee 2b9dedae8
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Oct 1 13:42:59 2020 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 115) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (14280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 137 136 021 - 4133
4 Start_Stop_Count -O--CK 100 100 000 - 133
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 11869
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 133
192 Power-Off_Retract_Count -O--CK 200 200 000 - 58
193 Load_Cycle_Count -O--CK 200 200 000 - 199
194 Temperature_Celsius -O---K 095 090 000 - 48
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 30% 11869 1565210488
# 2 Short offline Completed without error 00% 11856 -
# 3 Short offline Completed without error 00% 11845 -
# 4 Short offline Completed without error 00% 11821 -
# 5 Extended offline Completed without error 00% 11811 -
# 6 Short offline Completed without error 00% 11797 -
# 7 Short offline Completed without error 00% 11773 -
# 8 Short offline Completed without error 00% 11749 -
# 9 Short offline Completed without error 00% 11725 -
#10 Short offline Completed without error 00% 11701 -
#11 Short offline Completed without error 00% 11677 -
#12 Short offline Completed without error 00% 11667 -
#13 Short offline Completed without error 00% 11643 -
#14 Short offline Completed without error 00% 11619 -
#15 Extended offline Completed without error 00% 11609 -
#16 Short offline Completed without error 00% 11595 -
#17 Short offline Completed without error 00% 11571 -
#18 Short offline Completed without error 00% 11547 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: 26/49 Celsius
Lifetime Min/Max Temperature: 24/52 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (62)
Index Estimated Time Temperature Celsius
63 2020-10-01 05:45 49 ******************************
... ..( 15 skipped). .. ******************************
79 2020-10-01 06:01 49 ******************************
80 2020-10-01 06:02 48 *****************************
... ..( 3 skipped). .. *****************************
84 2020-10-01 06:06 48 *****************************
85 2020-10-01 06:07 44 *************************
... ..(342 skipped). .. *************************
428 2020-10-01 11:50 44 *************************
429 2020-10-01 11:51 45 **************************
... ..( 2 skipped). .. **************************
432 2020-10-01 11:54 45 **************************
433 2020-10-01 11:55 46 ***************************
... ..( 6 skipped). .. ***************************
440 2020-10-01 12:02 46 ***************************
441 2020-10-01 12:03 47 ****************************
... ..( 6 skipped). .. ****************************
448 2020-10-01 12:10 47 ****************************
449 2020-10-01 12:11 48 *****************************
... ..( 16 skipped). .. *****************************
466 2020-10-01 12:28 48 *****************************
467 2020-10-01 12:29 49 ******************************
... ..( 72 skipped). .. ******************************
62 2020-10-01 13:42 49 ******************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 133 --- Lifetime Power-On Resets
0x01 0x010 4 11869 --- Power-on Hours
0x01 0x018 6 25506218939 --- Logical Sectors Written
0x01 0x020 6 531274404 --- Number of Write Commands
0x01 0x028 6 38686903805 --- Logical Sectors Read
0x01 0x030 6 170759989 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 11801 --- Spindle Motor Power-on Hours
0x03 0x010 4 11692 --- Head Flying Hours
0x03 0x018 4 258 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 2 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 48 --- Current Temperature
0x05 0x010 1 43 --- Average Short Term Temperature
0x05 0x018 1 45 --- Average Long Term Temperature
0x05 0x020 1 53 --- Highest Temperature
0x05 0x028 1 22 --- Lowest Temperature
0x05 0x030 1 47 --- Highest Average Short Term Temperature
0x05 0x038 1 34 --- Lowest Average Short Term Temperature
0x05 0x040 1 45 --- Highest Average Long Term Temperature
0x05 0x048 1 36 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 566 --- Number of Hardware Resets
0x06 0x010 4 273 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 58461 Vendor specific
root@freenas[~]# zpool import
root@freenas[~]# zpool status
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:00:10 with 0 errors on Thu Oct 1 03:45:10 2020
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
nvd0p2 ONLINE 0 0 0
errors: No known data errors
pool: pool
state: ONLINE
scan: scrub repaired 0 in 0 days 02:09:43 with 0 errors on Sun Aug 23 06:09:45 2020
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/2ab5e31f-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2c61d427-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2e1f7ea9-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
gptid/2fdfa8a8-bfff-11e8-90ce-7085c27b2624 ONLINE 0 0 0
errors: No known data errors