Aaron C. de Bruyn
Dabbler
- Joined
- Jun 17, 2013
- Messages
- 36
I'm curious why ZFS is repairing two drives without showing any read, write, or checksum errors.
The drives are definitely having problems--dmesg shows a bunch of ATA errors.
-A
The drives are definitely having problems--dmesg shows a bunch of ATA errors.
-A
Code:
pool: tank state: ONLINE scan: scrub in progress since Thu May 15 09:00:00 2014 229G scanned out of 1.22T at 43.2M/s, 6h45m to go 3.73M repaired, 18.24% done config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/c6825711-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 (repairing) gptid/c6cdf6d0-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 gptid/c71821cf-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 raidz1-1 ONLINE 0 0 0 gptid/c7a7294e-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 gptid/c820a68a-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 (repairing) gptid/c8ae5b9b-b912-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 logs gptid/276ccffe-b913-11e3-81a7-002590dc4ed0.eli ONLINE 0 0 0 spares gptid/5b96f81c-b913-11e3-81a7-002590dc4ed0.eli AVAIL errors: No known data errors