scan: scrub repaired

Status
Not open for further replies.
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
in zpool status say this
scan: scrub repaired 512 in 1h30m with 0 errors on
is normal this? Why can you say this?

state: ONLINE
scan: scrub repaired 512 in 1h30m with 0 errors on xxxxxxxxxxx
config:

NAME STATE READ WRITE CKSUM
xxxxxx ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
gptid/71d5c356-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/72a71c60-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7376bed0-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7446f13b-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75170531-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75e5e8d2-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/76b535d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/776a5380-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/e40c816e-be51-11e6-b123-001b21967750 ONLINE 0 0 0
gptid/792735c4-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7a21fd3a-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7b3ac8db-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7c1fd241-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7cd6e55f-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
raidz3-1 ONLINE 0 0 0
gptid/7d8ce98d-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e0805e6-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e82c2d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7efddc69-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7f780fa8-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7ff21a63-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/806c33c9-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/80e63a10-868d-11e6-9eac-001b21967750 ONLINE 0 0 0

errors: No known data errors
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
A disk is having issues. Check your smart data. You should have gotten an email from your tests you setup.

Sent from my Nexus 5X using Tapatalk
 
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
Tell me in detail what you need
If a disk failed before but was replaced but that was already done before ...
But is it normal that now keep saying this?
thanks
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
You should never really see repairs unless something is wrong.

smartctl -a /dev/daX where x is your disk number and do this for all disks.

Sent from my Nexus 5X using Tapatalk
 
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
/dev/1: Unable to detect device type
Please specify device type with the -d option.

Use smartctl -h to get a usage summary
 
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 13959
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 11
177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 33
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 071 055 000 Old_age Always - 29
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 6
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 21216997513

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
You are not running smart tests on this disk and probably all disks. Please check out the manual and set up that testing.

While you are reading please read the forum rules since you have broken a couple already. Freenas version and all hardware specs should be provided with a new thread.

Sent from my Nexus 5X using Tapatalk
 
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
But if I execute what it indicates for each of the disks, if one was not bad that it was supposed to report?
 
H

Hostigal

Dabbler
Joined
Dec 21, 2016
Messages
22
but in zpool status say ok


scan: scrub repaired 512 in 1h30m with 0 errors on
is normal this? Why can you say this?

state: ONLINE
scan: scrub repaired 512 in 1h30m with 0 errors on xxxxxxxxxxx
config:

NAME STATE READ WRITE CKSUM
xxxxxx ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
gptid/71d5c356-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/72a71c60-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7376bed0-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7446f13b-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75170531-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75e5e8d2-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/76b535d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/776a5380-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/e40c816e-be51-11e6-b123-001b21967750 ONLINE 0 0 0
gptid/792735c4-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7a21fd3a-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7b3ac8db-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7c1fd241-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7cd6e55f-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
raidz3-1 ONLINE 0 0 0
gptid/7d8ce98d-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e0805e6-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e82c2d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7efddc69-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7f780fa8-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7ff21a63-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/806c33c9-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/80e63a10-868d-11e6-9eac-001b21967750 ONLINE 0 0 0

errors: No known data errors
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
Hostigal said:
Is it normal then ??
Click to expand...

Hostigal said:
in zpool status say this
scan: scrub repaired 512 in 1h30m with 0 errors on
is normal this? Why can you say this?

state: ONLINE
scan: scrub repaired 512 in 1h30m with 0 errors on xxxxxxxxxxx
config:

NAME STATE READ WRITE CKSUM
xxxxxx ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
gptid/71d5c356-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/72a71c60-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7376bed0-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7446f13b-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75170531-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/75e5e8d2-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/76b535d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/776a5380-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/e40c816e-be51-11e6-b123-001b21967750 ONLINE 0 0 0
gptid/792735c4-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7a21fd3a-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7b3ac8db-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7c1fd241-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7cd6e55f-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
raidz3-1 ONLINE 0 0 0
gptid/7d8ce98d-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e0805e6-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7e82c2d7-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7efddc69-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7f780fa8-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/7ff21a63-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/806c33c9-868d-11e6-9eac-001b21967750 ONLINE 0 0 0
gptid/80e63a10-868d-11e6-9eac-001b21967750 ONLINE 0 0 0

errors: No known data errors
Click to expand...
You need to set up smart tests to run using the GUI. Or run them manually with smartctl -t long /dev/adaX.

Sent from my Nexus 5X using Tapatalk
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
Hostigal said:
but if now zpool status is ok and all disk say ok??!!
Click to expand...
If you're OK with it just call it fixed. You still need to run consistent smart tests.

Sent from my Nexus 5X using Tapatalk
 
Status
Not open for further replies.

Similar threads

T
  • Locked
can't change passphrase
Replies
4
Views
2K
tsf0x13
T
M
  • Locked
FreeNAS-9.10.2-U4 Critical - The volume MAIN_BCKP (ZFS) state is ONLINE: One or more devices has ...
Replies
2
Views
958
mst
M
P
  • Locked
CIFS mounted volume-cannot write big files from Win7 or 10
Replies
11
Views
1K
philhu
P
E
  • Locked
Multipath not showing up 9.10
Replies
5
Views
2K
dlavigne
D
G
  • Locked
update to 201502271818 fail
Replies
4
Views
2K
giovannife
G
Top