Andrew Bell
Cadet
- Joined
- Dec 13, 2018
- Messages
- 1
I have a server with a SAS3004 controller and 2 SAS3408 controllers. When I boot FreeNAS 11.2, this happens:
root@fred[~]# lspci | grep -i raid
1b:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3408 (rev 01)
65:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3008 [Fury] (rev 02)
b3:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3408 (rev 01)
root@fred[~]# dmesg -a | grep -i raid
pci7: <mass storage, RAID> at device 0.0 (no driver attached)
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd
pci11: <mass storage, RAID> at device 0.0 (no driver attached)
I want to try to prevent the 3004 from loading the mrsas driver and have it use the mpr driver instead, and see if the mpr driver will then load the 3408s. But I have no idea how to do that.
Anyone have a suggestion?
root@fred[~]# lspci | grep -i raid
1b:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3408 (rev 01)
65:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3008 [Fury] (rev 02)
b3:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3408 (rev 01)
root@fred[~]# dmesg -a | grep -i raid
pci7: <mass storage, RAID> at device 0.0 (no driver attached)
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd
pci11: <mass storage, RAID> at device 0.0 (no driver attached)
I want to try to prevent the 3004 from loading the mrsas driver and have it use the mpr driver instead, and see if the mpr driver will then load the 3408s. But I have no idea how to do that.
Anyone have a suggestion?