I have a new FreeNAS mini box. The "View Disks" screen has "true" for all the 4 disks in the "Enable S.M.A.R.T." column. But the shell says otherwise:
Which is right? Or is the "Enable S.M.A.R.T." in GUI not the same thing as what would happen if I did "smartctl --smart=on /dev/ada{3,4}"?
This is on freenas 9.2.1.7. Also, there are four identical WD RED disks, and this is the case for only 2 of them. For the other two (ada0 & ada1), S.M.A.R.T seems enabled when checked with smartctl.
Thanks,
Saurav.
Code:
[root@freenas-primary ~]# smartctl --test=conveyance /dev/ada3 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) [root@freenas-primary ~]# smartctl --test=conveyance /dev/ada4 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) [root@freenas-primary ~]#
Which is right? Or is the "Enable S.M.A.R.T." in GUI not the same thing as what would happen if I did "smartctl --smart=on /dev/ada{3,4}"?
This is on freenas 9.2.1.7. Also, there are four identical WD RED disks, and this is the case for only 2 of them. For the other two (ada0 & ada1), S.M.A.R.T seems enabled when checked with smartctl.
Thanks,
Saurav.
Last edited: