Hello,
I've got a NAS running Freenas 11.3-U5 with 1 RAIDZ1 Pool of 6 * 4TB WD RED (CMR) HDD. All with 63K+ running hours. 15 days ago ada0p2 change to /dev/ada0p2 with read/writing fail. I ordered a new 4TB WD Red (CMR) HDD and I try to rebuild my NAS.
Freenas start the resilvering 10 days ago and every day, the resilvering restart when approaching 20%. It never end. On my own research I found some people talking about rebooting (properly) the system. However while I'm looking for a solution I discover that my ada3 have some reading issues...
1st Question: can the resilvering issue came from it?
2nd Question: Can I buy a second WD RED 4TB and replace the ada3 despite the resilvering still in progress?
3rd Question: If 2nd is not possible can I offline ada3 while resilvering and replace it later when the resilvering finish? without data loosing?
Here is the zpool status result:
The following segment is constantly updated throughout the day
When I plug a display on the NAS I have this error repeated:
Thank you a lot ;)
I've got a NAS running Freenas 11.3-U5 with 1 RAIDZ1 Pool of 6 * 4TB WD RED (CMR) HDD. All with 63K+ running hours. 15 days ago ada0p2 change to /dev/ada0p2 with read/writing fail. I ordered a new 4TB WD Red (CMR) HDD and I try to rebuild my NAS.
Freenas start the resilvering 10 days ago and every day, the resilvering restart when approaching 20%. It never end. On my own research I found some people talking about rebooting (properly) the system. However while I'm looking for a solution I discover that my ada3 have some reading issues...
1st Question: can the resilvering issue came from it?
2nd Question: Can I buy a second WD RED 4TB and replace the ada3 despite the resilvering still in progress?
3rd Question: If 2nd is not possible can I offline ada3 while resilvering and replace it later when the resilvering finish? without data loosing?
Here is the zpool status result:
root@Pure:~ # zpool status
pool: PureStorage
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Mon Mar 28 21:24:26 2022
895G scanned at 532M/s, 122G issued at 629M/s, 3.66T total
20.2G resilvered, 3.24% done, 0 days 01:38:28 to go
config:
NAME STATE READ WRITE CKSUM
PureStorage DEGRADED 0 0 459
raidz1-0 DEGRADED 0 0 921
gptid/57ad2629-a6ea-11ec-a933-bc5ff4b964d3 ONLINE 0 022
gptid/ebdbcda4-48c5-11e3-abd5-bc5ff4b964d3 DEGRADED 0 0 0 too many errors
gptid/eca7762e-48c5-11e3-abd5-bc5ff4b964d3 DEGRADED 0 0 0 too many errors
gptid/ed79b7e1-48c5-11e3-abd5-bc5ff4b964d3 DEGRADED 443 0 0 too many errors
gptid/ee4edc0a-48c5-11e3-abd5-bc5ff4b964d3 DEGRADED 0 0 0 too many errors
gptid/ef1f6ebe-48c5-11e3-abd5-bc5ff4b964d3 DEGRADED 0 0 0 too many errors
errors: 3 data errors, use '-v' for a list
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:00:19 with 0 errors on Mon Mar 28 03:45:19 2022
config:
The following segment is constantly updated throughout the day
scan: resilver in progress since Mon Mar 28 21:24:26 2022
895G scanned at 532M/s, 122G issued at 629M/s, 3.66T total
20.2G resilvered, 3.24% done, 0 days 01:38:28 to go
When I plug a display on the NAS I have this error repeated:
(ada3:ahcich4:0:0:0): CAM status: ATA Status Error
(ada3:ahcich4:0:0:0): ATA status; 51 (DRDY SERV ERR), error: 40 (UNC )
(ada3:ahcich4:0:0:0): RES: 51 40 00fa 6b 4b 0b 00 00 38 00
(ada3:ahcich4:0:0:0): Retrying command
(ada3:ahcich4:0:0:0):READ_DMA. ACB: c8 00 00 fa 6b 4b 00 00 00 00 38 00
Thank you a lot ;)