pumadace
Cadet
- Joined
- Jan 29, 2016
- Messages
- 2
Hello,
I am relatively new and mostly noob. Please I would appreciate any help and explanations.
Recently, my freenas send me mail stating:
(11.10 at 9:50) "The volume pumanas (ZFS) state is DEGRADED: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state."
(11.10 at 9:55) "The volume pumanas (ZFS) state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state."
(12.11 at 3:11) "freenas.local kernel log messages:
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <ST8000AS0002-1NA17Z AR15> s/n Z840J0MS detached
GEOM_ELI: Device ada1p1.eli destroyed.
GEOM_ELI: Detached ada1p1.eli on last close.
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
(ada1:ahcich5:0:0:0): Periph destroyed
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <ST8000AS0002-1NA17Z AR15> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z840J0MS
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 7630885MB (15628053168 512 byte sectors)
ada1: Previously was known as ad14
-- End of security output --"
after that I get almost every 2 hours in different intervals mail same as the first one (DEGRADED).
My configuration is 10x8TB Seagates Archive with two USB sticks Sandisk.
I dont know how to find any report of given problem and overall I dont understand current situation.
I am speculating whether drives are ok, or if there is some problem with data/power cables.
Thank you in advance for any suggestion or help.
I am relatively new and mostly noob. Please I would appreciate any help and explanations.
Recently, my freenas send me mail stating:
(11.10 at 9:50) "The volume pumanas (ZFS) state is DEGRADED: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state."
(11.10 at 9:55) "The volume pumanas (ZFS) state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state."
(12.11 at 3:11) "freenas.local kernel log messages:
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <ST8000AS0002-1NA17Z AR15> s/n Z840J0MS detached
GEOM_ELI: Device ada1p1.eli destroyed.
GEOM_ELI: Detached ada1p1.eli on last close.
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
(ada1:ahcich5:0:0:0): Periph destroyed
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <ST8000AS0002-1NA17Z AR15> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z840J0MS
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 7630885MB (15628053168 512 byte sectors)
ada1: Previously was known as ad14
-- End of security output --"
after that I get almost every 2 hours in different intervals mail same as the first one (DEGRADED).
My configuration is 10x8TB Seagates Archive with two USB sticks Sandisk.
Code:
[root@freenas ~]# zpool status -v pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h4m with 0 errors on Sat Sep 22 03:49:44 2018 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da8p2 ONLINE 0 0 0 da9p2 ONLINE 0 0 0 errors: No known data errors pool: pumanas state: ONLINE scan: resilvered 16K in 0h0m with 0 errors on Fri Oct 12 22:37:46 2018 config: NAME STATE READ WRITE CKSUM pumanas ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/456c47b9-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/463ceeda-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/47132221-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/47ebee2f-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/48bf0f82-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/498938d1-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/4a605ceb-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/4b549442-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/4c2ebdf6-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 gptid/4d05dd7a-fa8d-11e6-aaad-0cc47a6c1358 ONLINE 0 0 0 errors: No known data errors
Code:
[root@freenas ~]# camcontrol devlist <ATA ST8000AS0002-1NA AR15> at scbus0 target 0 lun 0 (pass0,da0) <ATA ST8000AS0002-1NA AR15> at scbus0 target 1 lun 0 (pass1,da1) <ATA ST8000AS0002-1NA AR15> at scbus0 target 2 lun 0 (pass2,da2) <ATA ST8000AS0002-1NA AR15> at scbus0 target 3 lun 0 (pass3,da3) <ATA ST8000AS0002-1NA AR15> at scbus0 target 4 lun 0 (pass4,da4) <ATA ST8000AS0002-1NA AR15> at scbus0 target 5 lun 0 (pass5,da5) <ATA ST8000AS0002-1NA AR15> at scbus0 target 6 lun 0 (pass6,da6) <ATA ST8000AS0002-1NA AR15> at scbus0 target 7 lun 0 (pass7,da7) <ST8000AS0002-1NA17Z AR17> at scbus5 target 0 lun 0 (pass8,ada0) <ST8000AS0002-1NA17Z AR15> at scbus6 target 0 lun 0 (ada1,pass9) <SanDisk Ultra Fit 1.00> at scbus8 target 0 lun 0 (pass10,da8) <SanDisk Ultra Fit 1.00> at scbus9 target 0 lun 0 (pass11,da9)
I dont know how to find any report of given problem and overall I dont understand current situation.
I am speculating whether drives are ok, or if there is some problem with data/power cables.
Thank you in advance for any suggestion or help.