Cainram
Dabbler
- Joined
- Jan 23, 2014
- Messages
- 31
I have a periodic snapshot task that is replicating to another server. The data to be replicated is on 'shipdocs', the PUSH machine. I have been replicating successfully to my backup server, 'tyrellcorp' (PULL) for some time now. I have created another ZFS Replication task and have pointed it at a second PULL machine, 'searchspace'. I'm not getting any replication to searchspace. Here is some version info:
PUSH (shipdocs) - FreeNAS-9.2.1.6-RELEASE-x64 (ddd1e39)
PULL #1 Working (tyrellcorp) - FreeNAS-9.10.1-U4 (ec9a7d3)
PULL #2 Not working (searchspace) - FreeNAS-9.2.1.7-RELEASE-x64 (fdbe9a0)
The hardware on all three machines is more that enough to handle the amount of storage. I diligently followed the guidelines and requisitioned the appropriate type/amount of RAM, etc.
The amount of data is 31GB. There is a gigabit switch between the two machines and both have gigabit NICs. I'm not seeing much activity on either machine to indicate an initial transfer. And on the PUSH machine both the 'Status' and 'Last snapshot sent to remote side' are empty.
When I run
When I try to ssh in with a command like this:
Logs on searchspace (/var/log/auth.log) shows 'Accepted publickey for root from <searchspace>.
Any ideas?
The only thing that is different from anything else I have been successful with is the fact that I'm trying to create two different ZFS replication tasks from the same Periodic snapshot task. Has anyone tried this or had trouble with it?
Thanks in advance
PUSH (shipdocs) - FreeNAS-9.2.1.6-RELEASE-x64 (ddd1e39)
PULL #1 Working (tyrellcorp) - FreeNAS-9.10.1-U4 (ec9a7d3)
PULL #2 Not working (searchspace) - FreeNAS-9.2.1.7-RELEASE-x64 (fdbe9a0)
The hardware on all three machines is more that enough to handle the amount of storage. I diligently followed the guidelines and requisitioned the appropriate type/amount of RAM, etc.
The amount of data is 31GB. There is a gigabit switch between the two machines and both have gigabit NICs. I'm not seeing much activity on either machine to indicate an initial transfer. And on the PUSH machine both the 'Status' and 'Last snapshot sent to remote side' are empty.
When I run
ssh -vv -i /data/ssh/replication <searchspace domain name>
I am not asked for a password. I don't get a command prompt but this:Code:
Welcome to searchspace.xxxxxxx located on the searchspace server. debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 [root@searchspace] ~# debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 [root@searchspace] ~# debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug1: client_input_channel_req: channel 0 rtype keepalive@openssh.com reply 1 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4 debug2: tcpwinsz: 66608 for connection: 4
When I try to ssh in with a command like this:
ssh root@<searchspace domain name>
I am prompted for a password.Logs on searchspace (/var/log/auth.log) shows 'Accepted publickey for root from <searchspace>.
Any ideas?
The only thing that is different from anything else I have been successful with is the fact that I'm trying to create two different ZFS replication tasks from the same Periodic snapshot task. Has anyone tried this or had trouble with it?
Thanks in advance
Last edited by a moderator: