I'm using FreeNAS 9.3.
I had a drive fail on me, and I just received a replacement. The problem is my 2TB Seagate Green drives were long out of warranty, and rather than buying a used one on eBay I bought a new Western Digital Red drive.
When attempting to replace the drive (using the instructions here), I'm getting the following:
Is there anything I can do to make this drive work?
Thanks in advance!
I had a drive fail on me, and I just received a replacement. The problem is my 2TB Seagate Green drives were long out of warranty, and rather than buying a used one on eBay I bought a new Western Digital Red drive.
When attempting to replace the drive (using the instructions here), I'm getting the following:
Nov 4 19:00:19 larry notifier: 1+0 records in
Nov 4 19:00:19 larry notifier: 1+0 records out
Nov 4 19:00:19 larry notifier: 1048576 bytes transferred in 0.026946 secs (38914222 bytes/sec)
Nov 4 19:00:19 larry notifier: dd: /dev/ada3: short write on character device
Nov 4 19:00:19 larry notifier: dd: /dev/ada3: end of device
Nov 4 19:00:19 larry notifier: 5+0 records in
Nov 4 19:00:19 larry notifier: 4+1 records out
Nov 4 19:00:19 larry notifier: 4284416 bytes transferred in 0.022792 secs (187978108 bytes/sec)
Nov 4 19:00:20 larry notifier: swapoff: /dev/ada3p1.eli: No such file or directory
Nov 4 19:00:20 larry notifier: geli: No such device: /dev/ada3p1.
Nov 4 19:00:20 larry manage.py: [middleware.exceptions:38] [MiddlewareError: Disk replacement failed: "cannot replace 17937066459693012501 with gptid/33f68824-8350-11e5-bece-0019b93dafbc: device is too small, "]
I Googled around for a while, and I found how to compare the # of bytes on the drives -- they appear to be the same. I'm guessing there's more to it than that.Nov 4 19:00:19 larry notifier: 1+0 records out
Nov 4 19:00:19 larry notifier: 1048576 bytes transferred in 0.026946 secs (38914222 bytes/sec)
Nov 4 19:00:19 larry notifier: dd: /dev/ada3: short write on character device
Nov 4 19:00:19 larry notifier: dd: /dev/ada3: end of device
Nov 4 19:00:19 larry notifier: 5+0 records in
Nov 4 19:00:19 larry notifier: 4+1 records out
Nov 4 19:00:19 larry notifier: 4284416 bytes transferred in 0.022792 secs (187978108 bytes/sec)
Nov 4 19:00:20 larry notifier: swapoff: /dev/ada3p1.eli: No such file or directory
Nov 4 19:00:20 larry notifier: geli: No such device: /dev/ada3p1.
Nov 4 19:00:20 larry manage.py: [middleware.exceptions:38] [MiddlewareError: Disk replacement failed: "cannot replace 17937066459693012501 with gptid/33f68824-8350-11e5-bece-0019b93dafbc: device is too small, "]
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M7PFZPFZ
LU WWN Device Id: 5 0014ee 20c8b5260
Firmware Version: 82.00A82
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 4 19:12:50 2015 EST
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Serial Number: 6XW1ANB7
LU WWN Device Id: 5 000c50 02255498b
Firmware Version: CC34
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Nov 4 19:12:53 2015 EST
Model Family: Western Digital Red
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M7PFZPFZ
LU WWN Device Id: 5 0014ee 20c8b5260
Firmware Version: 82.00A82
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 4 19:12:50 2015 EST
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Serial Number: 6XW1ANB7
LU WWN Device Id: 5 000c50 02255498b
Firmware Version: CC34
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Nov 4 19:12:53 2015 EST
Is there anything I can do to make this drive work?
Thanks in advance!