Hi,
Today that I logged to my freenas 8.3 I got the following error message
I performed a smartctl test and got the following
From the above what I understand is that the drive might fail in the future right?
As this drive only holds backups that are not essential, I have decided to keep the drive as long as it lasts. Is there a way to remove the error message that is displayed in freenas or even fix the problem so that freenas won't try to read/write to these sectors?
thanks for your time
Today that I logged to my freenas 8.3 I got the following error message
Code:
May 13 12:12:31 freenas smartd[40230]: Device: /dev/da2 [SAT], 128 Currently unreadable (pending) sectors May 13 12:12:31 freenas smartd[40230]: Device: /dev/da2 [SAT], 128 Offline uncorrectable sectors
I performed a smartctl test and got the following
Code:
smartctl -a /dev/da2 smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors) Device Model: ST2000DM001-1CH164 Serial Number: Z2F0E464 LU WWN Device Id: 5 000c50 04e606f55 Firmware Version: CC43 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon May 12 15:56:38 2014 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART STATUS RETURN: incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 251) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 37188568 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 39 5 Reallocated_Sector_Ct 0x0033 092 092 036 Pre-fail Always - 11232 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 13617924 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11817 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 40 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 060 050 045 Old_age Always - 40 (Min/Max 18/42) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 37 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1880 194 Temperature_Celsius 0x0022 040 050 000 Old_age Always - 40 (0 15 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 128 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 128 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 234475149602277 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 18138964064 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14023406812 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 11815 2737632440 # 2 Short offline Completed: read failure 50% 11806 2737632440 # 3 Short offline Completed: read failure 90% 11782 2737630848 # 4 Short offline Completed without error 00% 11758 - # 5 Short offline Completed without error 00% 11734 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
From the above what I understand is that the drive might fail in the future right?
As this drive only holds backups that are not essential, I have decided to keep the drive as long as it lasts. Is there a way to remove the error message that is displayed in freenas or even fix the problem so that freenas won't try to read/write to these sectors?
thanks for your time