Offline uncorrectable sectors, bad news??

Status
Not open for further replies.
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
Hello,

i rarely go on the freenas GUI, and i see yesterday on bottom ssh this messages:

Code:
Jan 20 19:33:32 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectors
Jan 20 19:33:32 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectors
Jan 20 19:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 20 19:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors


This appears all the 30 minutes.

Like i see in the forum i do this commands:

smartctl -q noserial -a /dev/ada0

Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda Green (AF)
Device Model:    ST2000DL003-9VT166
Firmware Version: CC45
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jan 20 20:05:58 2014 CET
 
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/218171en
 
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline
data collection:                (  612) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (  1) minutes.
Extended self-test routine
recommended polling time:        ( 338) minutes.
Conveyance self-test routine
recommended polling time:        (  2) minutes.
SCT capabilities:              (0x30b7) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  102  096  006    Pre-fail  Always      -      1773848
  3 Spin_Up_Time            0x0003  093  092  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      101
  5 Reallocated_Sector_Ct  0x0033  100  100  036    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  088  060  030    Pre-fail  Always      -      697813824
  9 Power_On_Hours          0x0032  077  077  000    Old_age  Always      -      20839
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      99
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  093  093  000    Old_age  Always      -      7
188 Command_Timeout        0x0032  100  097  000    Old_age  Always      -      9
189 High_Fly_Writes        0x003a  096  096  000    Old_age  Always      -      4
190 Airflow_Temperature_Cel 0x0022  064  054  045    Old_age  Always      -      36 (Min/Max 36/40)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      54
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      101
194 Temperature_Celsius    0x0022  036  046  000    Old_age  Always      -      36 (0 22 0 0 0)
195 Hardware_ECC_Recovered  0x001a  018  006  000    Old_age  Always      -      1773848
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      16
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      16
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      183266254541162
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      2525900995
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      2879817559
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure      90%    20825        2670822896
# 2  Short offline      Completed without error      00%      9110        -
# 3  Short offline      Completed without error      00%      9109        -
# 4  Short offline      Completed without error      00%      9108        -
# 5  Short offline      Completed without error      00%      9107        -
# 6  Short offline      Completed without error      00%      9106        -
# 7  Short offline      Completed without error      00%      9105        -
# 8  Short offline      Completed without error      00%      9104        -
# 9  Short offline      Completed without error      00%      9103        -
#10  Short offline      Completed without error      00%      9102        -
#11  Short offline      Completed without error      00%      9101        -
#12  Short offline      Completed without error      00%      9100        -
#13  Short offline      Completed without error      00%      9099        -
#14  Short offline      Completed without error      00%      9098        -
#15  Short offline      Completed without error      00%      9097        -
#16  Short offline      Completed without error      00%      9096        -
#17  Short offline      Completed without error      00%      9095        -
#18  Short offline      Completed without error      00%      9094        -
#19  Short offline      Completed without error      00%      9093        -
#20  Short offline      Completed without error      00%      9092        -
#21  Short offline      Completed without error      00%      9091        -
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


smartctl -q noserial -a /dev/ada3

Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:    Seagate Barracuda Green (AF)
Device Model:    ST2000DL003-9VT166
Firmware Version: CC32
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:  ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jan 20 20:07:45 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline
data collection:                (  612) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (  1) minutes.
Extended self-test routine
recommended polling time:        ( 343) minutes.
Conveyance self-test routine
recommended polling time:        (  2) minutes.
SCT capabilities:              (0x30b7) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x000f  105  099  006    Pre-fail  Always      -      1918616
  3 Spin_Up_Time            0x0003  093  092  000    Pre-fail  Always      -      0
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      100
  5 Reallocated_Sector_Ct  0x0033  100  100  036    Pre-fail  Always      -      0
  7 Seek_Error_Rate        0x000f  088  060  030    Pre-fail  Always      -      707732238
  9 Power_On_Hours          0x0032  077  077  000    Old_age  Always      -      20839
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      98
183 Runtime_Bad_Block      0x0032  100  100  000    Old_age  Always      -      0
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0
187 Reported_Uncorrect      0x0032  098  098  000    Old_age  Always      -      2
188 Command_Timeout        0x0032  100  097  000    Old_age  Always      -      8
189 High_Fly_Writes        0x003a  098  098  000    Old_age  Always      -      2
190 Airflow_Temperature_Cel 0x0022  069  062  045    Old_age  Always      -      31 (Min/Max 31/34)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      53
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      100
194 Temperature_Celsius    0x0022  031  040  000    Old_age  Always      -      31 (0 22 0 0 0)
195 Hardware_ECC_Recovered  0x001a  026  006  000    Old_age  Always      -      1918616
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      8
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      8
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0
240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      63251983389034
241 Total_LBAs_Written      0x0000  100  253  000    Old_age  Offline      -      995592443
242 Total_LBAs_Read        0x0000  100  253  000    Old_age  Offline      -      3316528141
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure      90%    20827        3888233032
 
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Somes questions for the gurus, the pool of 5 disk is in RaidZ:
It's bad doctor ? (sadly, I almost know the answer).
Need i shutdown the server, waiting for the new 2 disks to reduce the risk, or i can stay running change 1 disk by one waiting for the RMA, if the warrantly work?
Maybe the problem exist a lot of month?

Thanks for the help.
 
warri

warri

Guru
Joined
Jun 6, 2011
Messages
1,193
There are tons of other threads regarding those errors.

If zpool status does not show any errors, and you have regular scrubs enabled there should be no need to shut down the server in the meantime. If the smart errors start to rack up you could start thinking about that.
So my advice is just wait for the new drives to arrive and replace the old ones.

To get notified of such problems earlier next time, set up regular smart tests and email notifications.
 
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
On the GUI the pool is marked HEALTY and zpool status give this:

Code:
  pool: nas-5HD
state: ONLINE
status: The pool is formatted using a legacy on-disk format.  The pool can
        still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'.  Once this is done, the
        pool will no longer be accessible on software that does not support feature
        flags.
  scan: none requested
config:
 
        NAME                                            STATE    READ WRITE CKSUM
        nas-5HD                                        ONLINE      0    0    0
          raidz1-0                                      ONLINE      0    0    0
            gptid/4f3213fc-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/4fbca83e-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/5040e138-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/50d35a61-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/5159c1b6-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
 
errors: No known data errors


I never perform a scrub my self, apparently the gui have one enbled:
Threshold days:35
Day of month: everyday
Month:every month
Day of week:sunday

if i understand right, the scrub is made all the 35 days, where i can find the report?
 
C

cyberjock

Inactive Account
Joined
Mar 25, 2012
Messages
19,526
If you check out your "scan: none requested" that means you've never done a scrub. Whoops!
 
warri

warri

Guru
Joined
Jun 6, 2011
Messages
1,193
Correct, the default scrub occurs every 35 days. If there are problems with the scrub, you get an email (if you setup email notifications!) and the alert icon in the GUI will change its colour. Also you can see the outcome in the zpool status output - in your case everything is OK.

EDIT: cyberjock is right, in your case there hasn't been any scrub performed on the volume yet.
 
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
Thx warri for the advice.

I read a lot of thread about those errors but some say stop server don't take risk and other keep running.

thx cyberjock for the check.

strange scrub was enabled in the GUI and didn't perfom the event?

I manually execute a scrub is in progress for ... 58hours :'(

If i buy a hard disk 2To in paper, is there a risk his real size is different of my own failure disk, and pose problem for the rebuild of the pool?

My pool have 5 Seagate barracuda green 2To (60€ each, 2 year ago), the prices are mad, some advice to replace?
 
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
AT the 8Am the scrub announce 6h to the end, now at 22 PM, 3hours left.
It's very slow, during the day, the scrub only progress of 15 %, and some Ko was repaired.

Code:
  pool: nas-5HD
state: ONLINE
status: The pool is formatted using a legacy on-disk format.  The pool can
        still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'.  Once this is done, the
        pool will no longer be accessible on software that does not support feature
        flags.
  scan: scrub in progress since Mon Jan 20 23:39:29 2014
        7.88T scanned out of 8.91T at 100M/s, 2h59m to go
        224K repaired, 88.43% done
config:
 
        NAME                                            STATE    READ WRITE CKSUM
        nas-5HD                                        ONLINE      0    0    0
          raidz1-0                                      ONLINE      0    0    0
            gptid/4f3213fc-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0  (repairing)
            gptid/4fbca83e-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/5040e138-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/50d35a61-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0  (repairing)
            gptid/5159c1b6-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
 
errors: No known data errors
 
warri

warri

Guru
Joined
Jun 6, 2011
Messages
1,193
Depending on your hardware, scrub times of 20 hours or more are normal. The time is also affected if the NAS is used in this time. It shouldn't need to repair data though - another sign that you should replace the disks in question soon.
 
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
During the scrub, this messages appears in the log:

Code:
Jan 20 14:00:00 freenas newsyslog[978]: logfile turned over due to size>100KJan 20 14:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 14:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 14:03:32 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 14:03:32 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 14:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 14:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 14:33:32 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 14:33:32 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 15:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 15:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 15:03:32 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 15:03:32 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 15:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 15:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 15:33:32 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 15:33:32 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 16:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 16:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 16:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 16:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 16:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 16:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 16:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 16:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 17:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 17:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 17:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 17:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 17:30:45 freenas manage.py: [freeadmin.navtree:522] Couldn't retrieve https://192.168.0.100:80/plugins/sickbeard/3/_s/treemenu: timed outJan 20 17:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 17:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 17:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectorsJan 20 17:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectorsJan 20 18:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectorsJan 20 18:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectorsJan 20 18:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently Jan 21 08:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectors
Jan 21 08:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectors
Jan 21 08:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 08:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 09:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectors
Jan 21 09:03:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectors
Jan 21 09:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 09:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 09:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Currently unreadable (pending) sectors
Jan 21 09:33:31 freenas smartd[2557]: Device: /dev/ada0, 16 Offline uncorrectable sectors
Jan 21 09:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 09:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 09:40:28 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c0 2d 36 40 9f 00 00 00 00 00
Jan 21 09:40:28 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:40:28 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:40:28 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 48 2e 36 00 9f 00 00 c0 00
Jan 21 09:40:28 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:40:32 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c0 2d 36 40 9f 00 00 00 00 00
Jan 21 09:40:32 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:40:32 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:40:32 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 48 2e 36 00 9f 00 00 c0 00
Jan 21 09:40:32 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:40:35 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c0 2d 36 40 9f 00 00 00 00 00
Jan 21 09:40:35 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:40:35 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:40:35 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 48 2e 36 00 9f 00 00 c0 00
Jan 21 09:40:35 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:40:39 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c0 2d 36 40 9f 00 00 00 00 00
Jan 21 09:40:39 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:40:39 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:40:39 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 48 2e 36 00 9f 00 00 c0 00
Jan 21 09:40:39 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:40:42 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c0 2d 36 40 9f 00 00 00 00 00
Jan 21 09:40:42 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:40:42 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:40:42 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 48 2e 36 00 9f 00 00 c0 00
Jan 21 09:40:42 freenas kernel: (ada0:ahcich0:0:0:0): Error 5, Retries exhausted
Jan 21 09:41:24 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c8 85 31 40 9f 00 00 00 00 00
Jan 21 09:41:24 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:41:24 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:41:24 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 f0 85 31 00 9f 00 00 c0 00
Jan 21 09:41:24 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:41:27 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c8 85 31 40 9f 00 00 00 00 00
Jan 21 09:41:27 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:41:27 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:41:27 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 f0 85 31 00 9f 00 00 c0 00
Jan 21 09:41:27 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:41:30 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c8 85 31 40 9f 00 00 00 00 00
Jan 21 09:41:30 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:41:30 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:41:30 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 f0 85 31 00 9f 00 00 c0 00
Jan 21 09:41:30 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:41:34 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c8 85 31 40 9f 00 00 00 00 00
Jan 21 09:41:34 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:41:34 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:41:34 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 f0 85 31 00 9f 00 00 c0 00
Jan 21 09:41:34 freenas kernel: (ada0:ahcich0:0:0:0): Retrying command
Jan 21 09:41:37 freenas kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 c8 85 31 40 9f 00 00 00 00 00
Jan 21 09:41:37 freenas kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 09:41:37 freenas kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 09:41:37 freenas kernel: (ada0:ahcich0:0:0:0): RES: 41 40 f0 85 31 00 9f 00 00 c0 00
Jan 21 09:41:37 freenas kernel: (ada0:ahcich0:0:0:0): Error 5, Retries exhausted
Jan 21 10:03:31 freenas smartd[2557]: Device: /dev/ada0, ATA error count increased from 0 to 10
Jan 21 10:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 10:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 10:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 10:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 11:03:34 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 11:03:34 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 11:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 11:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 12:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 12:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 12:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 12:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 13:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 13:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 13:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 13:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 13:47:06 freenas manage.py: [freeadmin.navtree:522] Couldn't retrieve https://192.168.0.100:80/plugins/btsync/7/_s/treemenu: timed out
Jan 21 14:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 14:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 14:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 14:33:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 15:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Currently unreadable (pending) sectors
Jan 21 15:03:33 freenas smartd[2557]: Device: /dev/ada3, 8 Offline uncorrectable sectors
Jan 21 15:26:54 freenas kernel: (ada3:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 98 b9 c1 40 e7 00 00 00 00 00
Jan 21 15:26:54 freenas kernel: (ada3:ahcich3:0:0:0): CAM status: ATA Status Error
Jan 21 15:26:54 freenas kernel: (ada3:ahcich3:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 15:26:54 freenas kernel: (ada3:ahcich3:0:0:0): RES: 41 40 48 ba c1 00 e7 00 00 c0 00
Jan 21 15:26:54 freenas kernel: (ada3:ahcich3:0:0:0): Retrying command
Jan 21 15:26:58 freenas kernel: (ada3:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 98 b9 c1 40 e7 00 00 00 00 00
Jan 21 15:26:58 freenas kernel: (ada3:ahcich3:0:0:0): CAM status: ATA Status Error
Jan 21 15:26:58 freenas kernel: (ada3:ahcich3:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 15:26:58 freenas kernel: (ada3:ahcich3:0:0:0): RES: 41 40 48 ba c1 00 e7 00 00 c0 00
Jan 21 15:26:58 freenas kernel: (ada3:ahcich3:0:0:0): Retrying command
Jan 21 15:27:01 freenas kernel: (ada3:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 98 b9 c1 40 e7 00 00 00 00 00
Jan 21 15:27:01 freenas kernel: (ada3:ahcich3:0:0:0): CAM status: ATA Status Error
Jan 21 15:27:01 freenas kernel: (ada3:ahcich3:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 15:27:01 freenas kernel: (ada3:ahcich3:0:0:0): RES: 41 40 48 ba c1 00 e7 00 00 c0 00
Jan 21 15:27:01 freenas kernel: (ada3:ahcich3:0:0:0): Retrying command
Jan 21 15:27:05 freenas kernel: (ada3:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 98 b9 c1 40 e7 00 00 00 00 00
Jan 21 15:27:05 freenas kernel: (ada3:ahcich3:0:0:0): CAM status: ATA Status Error
Jan 21 15:27:05 freenas kernel: (ada3:ahcich3:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 15:27:05 freenas kernel: (ada3:ahcich3:0:0:0): RES: 41 40 48 ba c1 00 e7 00 00 c0 00
Jan 21 15:27:05 freenas kernel: (ada3:ahcich3:0:0:0): Retrying command
Jan 21 15:27:08 freenas kernel: (ada3:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 c0 98 b9 c1 40 e7 00 00 00 00 00
Jan 21 15:27:08 freenas kernel: (ada3:ahcich3:0:0:0): CAM status: ATA Status Error
Jan 21 15:27:08 freenas kernel: (ada3:ahcich3:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 15:27:08 freenas kernel: (ada3:ahcich3:0:0:0): RES: 41 40 48 ba c1 00 e7 00 00 c0 00
Jan 21 15:27:08 freenas kernel: (ada3:ahcich3:0:0:0): Error 5, Retries exhausted
Jan 21 15:33:34 freenas smartd[2557]: Device: /dev/ada3, ATA error count increased from 0 to 5


Scrub has finished:
Code:
pool: nas-5HD
state: ONLINE
status: The pool is formatted using a legacy on-disk format.  The pool can
        still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'.  Once this is done, the
        pool will no longer be accessible on software that does not support feature
        flags.
  scan: scrub repaired 224K in 26h33m with 0 errors on Wed Jan 22 02:12:35 2014
config:
 
        NAME                                            STATE    READ WRITE CKSUM
        nas-5HD                                        ONLINE      0    0    0
          raidz1-0                                      ONLINE      0    0    0
            gptid/4f3213fc-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/4fbca83e-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/5040e138-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/50d35a61-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
            gptid/5159c1b6-00c9-11e1-8c09-bcaec5cfa0b2  ONLINE      0    0    0
 
errors: No known data errors


Scan return this "scan: scrub repaired 224K in 26h33m with 0 errors"

to be continued ...
 
O

O2L

Dabbler
Joined
Oct 23, 2011
Messages
12
smartctl -q noserial -a /dev/ada0
Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (AF)
Device Model: ST2000DL003-9VT166
Firmware Version: CC45
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 22 10:14:38 2014 CET

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/218171en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 612) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 338) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 107 096 006 Pre-fail Always - 1068160
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 101
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 705272813
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20877
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 99
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 083 083 000 Old_age Always - 17
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 9
189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4
190 Airflow_Temperature_Cel 0x0022 064 054 045 Old_age Always - 36 (Min/Max 36/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 54
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 101
194 Temperature_Celsius 0x0022 036 046 000 Old_age Always - 36 (0 22 0 0 0)
195 Hardware_ECC_Recovered 0x001a 037 006 000 Old_age Always - 1068160
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 221989679681936
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3238546759
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1020630779

SMART Error Log Version: 1
ATA Error Count: 10 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 10 occurred at disk power-on lifetime: 20853 hours (868 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+05:45:18.826 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:18.826 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:18.826 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+05:45:18.626 READ LOG EXT
60 00 08 ff ff ff 4f 00 12d+05:45:15.371 READ FPDMA QUEUED

Error 9 occurred at disk power-on lifetime: 20853 hours (868 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+05:45:15.371 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:15.371 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:15.371 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+05:45:15.241 READ LOG EXT
60 00 08 ff ff ff 4f 00 12d+05:45:11.987 READ FPDMA QUEUED

Error 8 occurred at disk power-on lifetime: 20853 hours (868 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+05:45:11.987 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:11.987 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:11.987 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+05:45:11.857 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+05:45:08.589 READ FPDMA QUEUED

Error 7 occurred at disk power-on lifetime: 20853 hours (868 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+05:45:08.589 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:08.589 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+05:45:08.463 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+05:45:05.239 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:05.238 READ FPDMA QUEUED

Error 6 occurred at disk power-on lifetime: 20853 hours (868 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+05:45:05.239 READ FPDMA QUEUED
60 00 c0 ff ff ff 4f 00 12d+05:45:05.238 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+05:45:05.237 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+05:45:05.237 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+05:45:05.237 READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 20874 -
# 2 Extended offline Completed: read failure 90% 20825 2670822896
# 3 Short offline Completed without error 00% 9110 -
# 4 Short offline Completed without error 00% 9109 -
# 5 Short offline Completed without error 00% 9108 -
# 6 Short offline Completed without error 00% 9107 -
# 7 Short offline Completed without error 00% 9106 -
# 8 Short offline Completed without error 00% 9105 -
# 9 Short offline Completed without error 00% 9104 -
#10 Short offline Completed without error 00% 9103 -
#11 Short offline Completed without error 00% 9102 -
#12 Short offline Completed without error 00% 9101 -
#13 Short offline Completed without error 00% 9100 -
#14 Short offline Completed without error 00% 9099 -
#15 Short offline Completed without error 00% 9098 -
#16 Short offline Completed without error 00% 9097 -
#17 Short offline Completed without error 00% 9096 -
#18 Short offline Completed without error 00% 9095 -
#19 Short offline Completed without error 00% 9094 -
#20 Short offline Completed without error 00% 9093 -
#21 Short offline Completed without error 00% 9092 -
1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl -q noserial -a /dev/ada3
Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (AF)
Device Model: ST2000DL003-9VT166
Firmware Version: CC32
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 22 10:14:45 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 612) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 343) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 7348592
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 100
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 715248831
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20877
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 98
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 083 083 000 Old_age Always - 17
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 8
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
190 Airflow_Temperature_Cel 0x0022 069 062 045 Old_age Always - 31 (Min/Max 31/34)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 100
194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 22 0 0 0)
195 Hardware_ECC_Recovered 0x001a 011 006 000 Old_age Always - 7348592
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 258526966469009
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1374440013
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3412811231

SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5 occurred at disk power-on lifetime: 20858 hours (869 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+11:30:59.248 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:59.248 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+11:30:59.142 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+11:30:55.783 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:55.783 READ FPDMA QUEUED

Error 4 occurred at disk power-on lifetime: 20858 hours (869 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+11:30:55.783 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:55.783 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+11:30:55.678 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+11:30:52.254 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:52.254 READ FPDMA QUEUED

Error 3 occurred at disk power-on lifetime: 20858 hours (869 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+11:30:52.254 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:52.254 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+11:30:52.172 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+11:30:48.748 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:48.748 READ FPDMA QUEUED

Error 2 occurred at disk power-on lifetime: 20858 hours (869 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+11:30:48.748 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:48.748 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 12d+11:30:48.708 READ LOG EXT
60 00 c0 ff ff ff 4f 00 12d+11:30:45.386 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:45.377 READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 20858 hours (869 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 ff ff ff 4f 00 12d+11:30:45.386 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:45.377 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:45.369 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 12d+11:30:45.362 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 12d+11:30:45.359 READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 20875 -
# 2 Extended offline Completed: read failure 90% 20827 3888233032
1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The different logs are very long where i can see and confirm if i really need to change the 2 disks?
And for the futur how really activate the scrub?

Thx for the help
 
warri

warri

Guru
Joined
Jun 6, 2011
Messages
1,193
Check the link in my first post. This has been thoroughly explained in other threads.

Regarding automatic scrubs: Change the scrub time in the GUI to something else like 30 days and see if that helps.
 
Wyl

Wyl

Explorer
Joined
Jun 7, 2013
Messages
68
whats the command to manually start a scrub? i am having the same issue
 
Dusan

Dusan

Guru
Joined
Jan 29, 2013
Messages
1,165
Wyl said:
whats the command to manually start a scrub? i am having the same issue
Click to expand...
zpool scrub <pool_name>
However, you can also use the Scrub Volume button on the Active Volumes screen to manually initiate a scrub.
 
Status
Not open for further replies.

Similar threads

NugentS
Currently unreadable (pending) sectors
Replies
2
Views
3K
NugentS
NugentS
P
pool status unhealthy
Replies
16
Views
37K
sretalla
sretalla
madtulip
  • Locked
SMART error (FailedReadSmartSelfTestLog) detected on host
Replies
10
Views
4K
joeschmuck
joeschmuck
A
  • Locked
Currently unreadable (pending) sectors
Replies
3
Views
2K
Robert Trevellyan
R
M
  • Locked
Critical Alerts: 8 Offline uncorrectable sectors
Replies
12
Views
3K
MichaelBatz
M
Top