gh123man
Cadet
- Joined
- Apr 20, 2018
- Messages
- 4
Hi all,
I am running FreeNAS-11.1-U1 and have 16 (1.5 and 2.0TB mixed) drives in a raidz2 pool.
I recently had what I believe to be a faulty sata cable causing a device to pop online and offline over and over again. I have replaced the affected disk and the sata cable and it has left my pool in an odd state. It seems to resilver forever. Though unlike other cases where this has happened that I read about, it has not reported any dataloss. It seems to approach 100% and at some point starts over from 0% again.
Here is my zpool status:
I wrote a script to monitor the resilver every 10 seconds. Here is what it prints:
Any suggestions would be greatly appreciated. I recognize I may be in a situation where I will experience data loss since 3 drives are reporting issues and I can only lose a maximum of two. I would like to address any data issues after I get the pool back in a healthy state.
I am running FreeNAS-11.1-U1 and have 16 (1.5 and 2.0TB mixed) drives in a raidz2 pool.
I recently had what I believe to be a faulty sata cable causing a device to pop online and offline over and over again. I have replaced the affected disk and the sata cable and it has left my pool in an odd state. It seems to resilver forever. Though unlike other cases where this has happened that I read about, it has not reported any dataloss. It seems to approach 100% and at some point starts over from 0% again.
Here is my zpool status:
Code:
pool: Storage state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Fri Apr 20 09:38:15 2018 2.50T scanned at 2.12G/s, 997G issued at 845M/s, 13.5T total 60.9G resilvered, 7.22% done, 0 days 04:18:52 to go config: NAME STATE READ WRITE CKSUM Storage DEGRADED 0 0 0 raidz2-0 DEGRADED 0 0 0 replacing-0 DEGRADED 0 0 5 9457191272304144993 UNAVAIL 0 0 0 was /dev/gptid/41aeca34-42b2-11e8-95eb-0025902019d2 gptid/c3021635-443b-11e8-aad4-0025902019d2 ONLINE 0 0 0 (resilvering) gptid/347e7427-0302-11e8-ba38-0025902019d2 ONLINE 0 0 0 gptid/cd7f1522-d10e-11e6-8314-d05099ac059a ONLINE 0 0 0 gptid/544bb2a5-03a2-11e8-bfe2-0025902019d2 ONLINE 0 0 0 gptid/b11aaf92-d045-11e6-9e1e-d05099ac059a ONLINE 0 0 0 gptid/83187daa-8865-11e7-86cc-90e2ba20b6cd ONLINE 0 0 0 gptid/3e513b9e-6a44-11e7-b2c1-d05099ac059a ONLINE 0 0 0 gptid/b513319e-d045-11e6-9e1e-d05099ac059a ONLINE 0 0 0 gptid/b653f9f5-d045-11e6-9e1e-d05099ac059a ONLINE 0 0 0 (resilvering) gptid/b79e0383-d045-11e6-9e1e-d05099ac059a ONLINE 0 0 0 gptid/39750405-b780-11e7-8eb6-0025902019d2 ONLINE 0 0 0 gptid/b992fb2c-d045-11e6-9e1e-d05099ac059a ONLINE 0 0 0 gptid/620055b3-54ed-11e7-a60d-d05099ac059a ONLINE 0 0 0 gptid/a86410ae-3b57-11e7-88a5-d05099ac059a ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 (resilvering) gptid/5d6f5f8b-54eb-11e7-a60d-d05099ac059a ONLINE 0 0 0 logs gptid/012aec3f-c7e4-11e7-adb8-0025902019d2 ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0 days 00:02:49 with 0 errors on Thu Apr 19 03:47:49 2018 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/f045845b-c4b5-11e6-a12b-d05099ac059a ONLINE 0 0 0 gptid/2068d1a8-c47f-11e6-88d8-d05099ac059a ONLINE 0 0 0 errors: No known data errors
I wrote a script to monitor the resilver every 10 seconds. Here is what it prints:
Code:
269G resilvered, 31.95% done, 0 days 02:47:08 to go 270G resilvered, 32.01% done, 0 days 02:47:04 to go 270G resilvered, 32.06% done, 0 days 02:47:03 to go 271G resilvered, 32.10% done, 0 days 02:47:02 to go 271G resilvered, 32.16% done, 0 days 02:46:57 to go 271G resilvered, 32.22% done, 0 days 02:46:53 to go 272G resilvered, 32.28% done, 0 days 02:46:46 to go 272G resilvered, 32.33% done, 0 days 02:46:44 to go 273G resilvered, 32.39% done, 0 days 02:46:36 to go 273G resilvered, 32.43% done, 0 days 02:46:38 to go 273G resilvered, 32.43% done, 0 days 02:46:59 to go 273G resilvered, 32.46% done, 0 days 02:47:08 to go 0 resilvered, 0.00% done, 4 days 16:12:55 to go 0 resilvered, 0.00% done, 4 days 23:14:09 to go 491M resilvered, 0.06% done, 0 days 12:34:46 to go 1019M resilvered, 0.12% done, 0 days 08:34:00 to go 1.55G resilvered, 0.19% done, 0 days 07:01:33 to go
Any suggestions would be greatly appreciated. I recognize I may be in a situation where I will experience data loss since 3 drives are reporting issues and I can only lose a maximum of two. I would like to address any data issues after I get the pool back in a healthy state.
Last edited: