Problems on shutdown FreeNAS

[RogerTP]

Hello! ,

I am the newest to the forum, just registered and just installed FreeNAS.

I've been testing this OS for a week for my own NAs in production. Several formats later and various readings on FreeNAS networks and others.

Finally, once everything is clarified, I am in the final phase of installation and commissioning.

Calmly and step by step. All right..

As I was not going to follow the process today, I decided to shut down the server with Option 11 of the console. The shutdown of everything begins and there comes a time when the shutdown hangs right on the line that I cannot see everything but says:
DB: enter: executed AML Breackpoint opcode
thread pid 1 tid 100002]
topped at kdb_enter + 0x3b: movq $ 0, kdb_why
b: 0: kbd.enter.default> write cn_mute 1
n_mute 0 = 0x1
b: 0: kbd.enter .default> textdump dup

And he stands still ...

If I turn it off from the web interface it only does a restart it does not turn off ....

I read something to load in bios the default configuration I did and that's why I see the monitor interface cut .. But it still doesn't turn off

The equipment configuration is as follows:

HP ProLiant MicroServer Gen10 AMD Opteron X3216 1.6 GHz 8GB RAM DDR4 Server

Processor / Chipset
AMD Opteron X3216 / 1.6 GHz CPU
Max turbo speed 3 GHz
Number of Dual-Core cores
CPU # 1
Maximum number of CPU 1
Update level of
Upgradable CPU

Cache
Installed size 1 MB
Cache per processor 1 MB

RAM
Installed size 8GB / 32GB (max.)
DDR4 SDRAM technology - ECC
Memory speed
effective 2400 MHz
Memory speed
nominal 2400 MHz
288-pin DIMM form factor
Features No buffer memory

HDD

4x 2TB Seagate ironwolf 5900rpm
1x250gb WD green SSD


Storage controller
SATA type
Controller type SATA 6Gb / s interface
Storage Controller Name Marvell 88SE9230
RAID level RAID 0, RAID 1, RAID 10

Monitor
Samsung led.

Graphics Controller
VGA video interfaces

Network connection
2 x Gigabit Ethernet ports
Broadcom BCM5720 Ethernet Controller
Interconnection protocol
Ethernet data, Fast Ethernet, Gigabit Ethernet
Features Wake on LAN (WoL), PXE compatible

Expansion / Connectivity
Bays 1 (total) / 1 (free) x external 5.25 "
4 (total) / 4 (free) x internal 3.5 "LFF
Grooves
1 (total) / 1 (free) x PCIe 3.0 x8 - low profile
2 288-pin DIMMs
1 (total) / 0 (free) x CPU
1 (total) / 1 (free) x PCIe 3.0 x4 - low profile (x1 mode)
Interfaces
1 x VGA
3 x USB 2.0 (2 rear, 1 internal)
2 x LAN (Gigabit Ethernet)
4 x USB 3.0 (2 front, 2 rear)

Diverse
Compliance with ICES-003, EN55024, EMC, FCC CFR47 Part 15, ACPI 5.0, GB 9254, CNS
13438, EN61000-3-2, EN61000-3-3, K24, CISPR 32, EN 55032

Feeding
Device type Power supply
Nominal AC voltage 120/230 V (50/60 Hz)
Power supplied 200 watts

Operating systems / Software

FreeNAS


Certified OS Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016
Manufacturer's guarantee
Service and maintenance Limited warranty - parts and labor - 1 year - on-site

Dimensions and weight
Width 23 cm
Depth 25.4 cm
Height 23.5 cm
Weight 6.5 kg

Environment parameters
Minimum temperature of
10 ° C operation
Maximum temperature of
35 ° C operation
Humidity range of
10 to 90% operation (non-condensing)

Any recommendation solution? Thanks in advance.

 

[Alecmascot]

Have a read of this thread :

SOLVED - Shutdown and reboot problems

Hey guys, my FreeNAS server (specs below) wont shutdown. More precisely: If i do a "shutdown -h now" via ssh, the shutdown process will stop (picture below), so that i have to do a hard reset. If i try a shutdown via the GUI, my FreeNAS wont shutdown, instead it does a restart. I guess its...

www.ixsystems.com

 

[RogerTP]

I already tried that and almost everything that refers in the forum to shutdown deactivating lan, monitor pci usb -> hw.usb.no_shutdown_wait = 1 nothing works it still stops on the lines described above

 

[RogerTP]

Well, after reading something else I found something about the pools. I had created a pool with 4 discs seagate ironwolf of 2tb each in raidz2 with lz4 and zfs. I decided to clear the pool and try the shutdown. because it did not stop in the lines written above, on the contrary the system restarted without doing the shutdown .... why should this? I can't understand it

 

[RogerTP]

please i need help in freenas 12 similar error before format disc with dban only problem before create pool

 

[Samuel Tai]

By any chance are you using a USB or PS/2 keyboard? The breakpoint message indicates a keyboard error, and it may be looking for a PS/2 keyboard at that point.