9C1 Newbee
Patron
- Joined
- Oct 9, 2012
- Messages
- 485
I have had great luck the last few weeks with my new build.
SUPERMICRO MBD-X9SCM-F-O LGA
Xeon E3-1230V2
32G ECC Ram
Flashed M1015
6 3TB WD Green in raidz2
1 2TB WD Green for jail duty
About two weeks ago, I enabled the auto tune function. Other than that I have not molested the machine up to this point.
2 days ago I got an email from the system that a drive could not be opened. The drive did not show up in the GUI. I rebooted the system. The drive came back online and seemed to be working.
A different drive dropped out of the array an hour later. I rebooted and things seemed fine again.
I started a scrub of the pool.
I have never seen the scrub repair anything before. Something is up.
I have searched. I just don't know enough about shell commands to do anything. What should would you do next?
I also have a brand new 3TB Green here ready to roll if needed.
SUPERMICRO MBD-X9SCM-F-O LGA
Xeon E3-1230V2
32G ECC Ram
Flashed M1015
6 3TB WD Green in raidz2
1 2TB WD Green for jail duty
About two weeks ago, I enabled the auto tune function. Other than that I have not molested the machine up to this point.
2 days ago I got an email from the system that a drive could not be opened. The drive did not show up in the GUI. I rebooted the system. The drive came back online and seemed to be working.
A different drive dropped out of the array an hour later. I rebooted and things seemed fine again.
I started a scrub of the pool.
Code:
pool: BigPool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: scrub repaired 3.85M in 6h23m with 0 errors on Sun May 19 05:26:12 2013 config: NAME STATE READ WRITE CKS UM BigPool ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/f849925f-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 0 gptid/f9328a49-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 0 gptid/fa072ee7-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 0 gptid/fae46be7-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 0 gptid/fbba45b8-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 9 85 gptid/fc945db6-a41b-11e2-8c93-002590a969a1 ONLINE 0 0 0 errors: No known data errors pool: Jacuzzi state: ONLINE scan: scrub repaired 0 in 2h26m with 0 errors on Sun May 19 02:26:28 2013 config: NAME STATE READ WRITE CKSUM Jacuzzi ONLINE 0 0 0 gptid/9a2697ea-a4b9-11e2-8b46-002590a969a1 ONLINE 0 0 0 errors: No known data errors
I have never seen the scrub repair anything before. Something is up.
I have searched. I just don't know enough about shell commands to do anything. What should would you do next?
I also have a brand new 3TB Green here ready to roll if needed.