slayer99199
Dabbler
- Joined
- Oct 5, 2017
- Messages
- 17
FreeNAS config:
FreeNAS-11.0-U4 (54848d13b)
5x4TB HGST DeskStar NAS 7200 RPM
ASRock C236 WSI
16GB ECC memory
Old NAS:
QNAP TS-439
Networking:
FreeNAS - 1 x 1GB connection (I currently don't have a GB switch that supports LACP) on the FreeNAS.
QNAP - 2 x 1GB connections load-balanced (QNAP doesn't require LACP)
They're both connected directly to the switch. No Jumbo frames. Same subnet.
Boot: FreeNAS is currently installed on a 120GB SSD and backed up to a USB drive nightly through cron.
I'm stumped here. I've been battling this for a couple days and I feel like I'm missing something obvious. I'm in the process of copying my media from my QNAP to my FreeNAS. I'm experiencing very slow copies between the devices. I've tested both rsync and scp using the -rv commands and the speed is around 13-14mpbs.
CPU on both devices does not seem to be strained in any way.
I have a Windows network share to my QNAP and I set one up for FreeNAS...and ran robocopy on my windows machine between the 2 using the UNC paths and got 40mpbs. I know my QNAP is only capable of 60-70mbps through Windows (have tested previously).
I do have 2 jails configured. 1 for Plex and the other for Emby...but they're not being used (not configured in the house yet).
I have root SSH on both devices so I can provide whatever anyone needs to assist.
FreeNAS-11.0-U4 (54848d13b)
5x4TB HGST DeskStar NAS 7200 RPM
ASRock C236 WSI
16GB ECC memory
Old NAS:
QNAP TS-439
Networking:
FreeNAS - 1 x 1GB connection (I currently don't have a GB switch that supports LACP) on the FreeNAS.
QNAP - 2 x 1GB connections load-balanced (QNAP doesn't require LACP)
They're both connected directly to the switch. No Jumbo frames. Same subnet.
Boot: FreeNAS is currently installed on a 120GB SSD and backed up to a USB drive nightly through cron.
I'm stumped here. I've been battling this for a couple days and I feel like I'm missing something obvious. I'm in the process of copying my media from my QNAP to my FreeNAS. I'm experiencing very slow copies between the devices. I've tested both rsync and scp using the -rv commands and the speed is around 13-14mpbs.
CPU on both devices does not seem to be strained in any way.
I have a Windows network share to my QNAP and I set one up for FreeNAS...and ran robocopy on my windows machine between the 2 using the UNC paths and got 40mpbs. I know my QNAP is only capable of 60-70mbps through Windows (have tested previously).
I do have 2 jails configured. 1 for Plex and the other for Emby...but they're not being used (not configured in the house yet).
I have root SSH on both devices so I can provide whatever anyone needs to assist.