JimPhreak
Contributor
- Joined
- Sep 28, 2013
- Messages
- 132
System:
i3-4130
SuperMicro X10SLM-F-O
16GB Kingston ECC RAM
6x3TB WD Reds
M1015 HBA
FREENAS 9.1.1
So I've been having some issues with my CIFS write performance. I'm getting around 100MB/s read performance on average but my writes wind up around 50-55MB/s. I've got autotune enabled but I'm not sure how/if I need to fine tune my settings any more to improve performance. I'm planning to setup Link Aggregation shortly and want to be sure that I'm doing everything I can to saturate that 2Gb connection.
I've run the following test on my volume:
dd if=/dev/zero of=testfile bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes transferred in 0.512641 secs (199749848 bytes/sec)
190MB/s write
dd if=testfile of=/dev/zero bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes transferred in 0.202251 secs (506301682 bytes/sec)
482MB/s read
Are there any other tests I should be doing to determine if it's my volume or something with my shares maybe?
i3-4130
SuperMicro X10SLM-F-O
16GB Kingston ECC RAM
6x3TB WD Reds
M1015 HBA
FREENAS 9.1.1
So I've been having some issues with my CIFS write performance. I'm getting around 100MB/s read performance on average but my writes wind up around 50-55MB/s. I've got autotune enabled but I'm not sure how/if I need to fine tune my settings any more to improve performance. I'm planning to setup Link Aggregation shortly and want to be sure that I'm doing everything I can to saturate that 2Gb connection.
I've run the following test on my volume:
dd if=/dev/zero of=testfile bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes transferred in 0.512641 secs (199749848 bytes/sec)
190MB/s write
dd if=testfile of=/dev/zero bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes transferred in 0.202251 secs (506301682 bytes/sec)
482MB/s read
Are there any other tests I should be doing to determine if it's my volume or something with my shares maybe?