Originated as a missing pool on startup, read a few posts about similar but cannot find anything that directly relates.
zpool list
zpool status -xv
glabel status
smartctl -a /dev/da1 (Guess this highlights a different issue!)
Amateur but I don't think I have a backup of the pool information, anything relating to creating a new pool wipes the disks which I would obviously like to avoid.
Can anyone offer some advice on anything else to check next?
Virtual FreeNas 11.2-RC2 running on ESXI server
Adaptec raid controller for 4 x 3tb disks (showing as 8tb drive)
(not sure what other information is useful or relevant).
zpool list
Code:
[root@freenas ~]# zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT FREENAS 8.12T 2.74T 5.38T - - 0% 33% 1.00x ONLINE - freenas-boot 7.50G 1.51G 5.99G - - - 20% 1.00x ONLINE - [root@freenas ~]# ^C [root@freenas ~]#
zpool status -xv
Code:
[root@freenas ~]# zpool status -xv pool: FREENAS state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://illumos.org/msg/ZFS-8000-8A scan: scrub repaired 0 in 0 days 03:42:50 with 9 errors on Wed Nov 27 06:02:07 2019 config: NAME STATE READ WRITE CKSUM FREENAS ONLINE 0 0 0 gptid/514cd7dd-d91c-11e8-9d18-000c290b2ac7 ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/df-mnt-FREENAS/df_complex-reserved.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/zfs_arc_v2/gauge_arcstats_raw_counts-mutex_miss.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/zfs_arc_v2/gauge_arcstats_raw_size-size.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/zfs_arc/io_octets-L2.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/zfs_arc_v2/gauge_arcstats_raw_l2writes-l2_writes_error.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/zfs_arc_v2/gauge_arcstats_raw_l2write-l2_write_buffer_bytes_ scanned.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/cpu-0/cpu-user.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/cpu-0/cpu-nice.rrd FREENAS/.system/rrd-2272cbf872134cd4ab2b960f79d0a321:/localhost/aggregation-cpu-max/cpu-interrupt.rrd [root@freenas ~]#
glabel status
Code:
[root@freenas ~]# glabel status Name Status Components gptid/2b680521-d921-11e8-bb7a-000c290b2ac7 N/A da0p1 gptid/514cd7dd-d91c-11e8-9d18-000c290b2ac7 N/A da1p2 [root@freenas ~]#
smartctl -a /dev/da1 (Guess this highlights a different issue!)
Code:
[root@freenas ~]# smartctl -a /dev/da1 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Adaptec Product: Array Revision: V1.0 User Capacity: 8,987,208,581,120 bytes [8.98 TB] Logical block size: 512 bytes Serial number: 598CE7B200 Device type: disk Local Time is: Wed Nov 27 09:18:28 2019 PST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Read defect list: asked for grown list but didn't get it Error Counter logging not supported Device does not support Self Test logging [root@freenas ~]#
Amateur but I don't think I have a backup of the pool information, anything relating to creating a new pool wipes the disks which I would obviously like to avoid.
Can anyone offer some advice on anything else to check next?
Virtual FreeNas 11.2-RC2 running on ESXI server
Adaptec raid controller for 4 x 3tb disks (showing as 8tb drive)
(not sure what other information is useful or relevant).