Hi,
I've read the 10gbe networking primer and didn't see my issue in that thread.
What I have is a Windows 10 PC currently working with a 192.168.1.1/24 network.
I purchased 2 Mellanox cards and a DAC cable that was used here. https://blog.sherwinm.com/2018/02/06/10gb-network-between-windows-10-and-freenas/
I slotted both cards and they come up in both systems.
In Windows I assigned 192.168.1.100 and in FreeNAS I've assigned 192.168.100.2. FreeNAS configuration is below.
FreeNAS Network Summary Tab:
FreeNAS can not ping my Windows machine and my Windows machine can not ping the FreeNAS box on that subnet. I've restarted both with no luck and I'm not sure what to try next.
I've read the 10gbe networking primer and didn't see my issue in that thread.
What I have is a Windows 10 PC currently working with a 192.168.1.1/24 network.
I purchased 2 Mellanox cards and a DAC cable that was used here. https://blog.sherwinm.com/2018/02/06/10gb-network-between-windows-10-and-freenas/
I slotted both cards and they come up in both systems.
In Windows I assigned 192.168.1.100 and in FreeNAS I've assigned 192.168.100.2. FreeNAS configuration is below.
Code:
mlxen0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 options=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:02:c9:51:15:22 hwaddr 00:02:c9:51:15:22 inet 192.168.100.2 netmask 0xffffff00 broadcast 192.168.100.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>) status: active
FreeNAS Network Summary Tab:
Code:
Name IPv4 Address IPv6 Address igb0 192.168.1.250/24 mlxen0 192.168.100.2/24 Nameserver 8.8.8.8 8.8.4.4 Default route 192.168.1.1
FreeNAS can not ping my Windows machine and my Windows machine can not ping the FreeNAS box on that subnet. I've restarted both with no luck and I'm not sure what to try next.