Hi,
Last night I had a power failure. Now, upon rebooting the box (FreeNAS v9.2.1) I got (screenshot_3.jpg):
Rebooting the box or swapping the USB key (I tried FreeNAS v9.2.0) shows the same errors.
The hardware: FreeNAS v9.2.1, CPU Intel i3 3225, 16 GB RAM, HDD WD Red 3TB x 2, WD Re3 x1 TB
Pool layout:
tank0 with 2 HDDs in RAID 1, 10 datasets, ~ 50% full
tank1 with a 1 HDD, 1 dataset, ~ 15% full
Compression (lz4) enabled on tank0 and inherited by all the datasets.
Scrubbing set to run once every 15 days, and SMART tests once a month.
There are no errors/repairs reported by the last scrub (or any other scrub) on both pools.
I'm pretty much stuck.
I'll try with the latest version of FreeNAS and report back. Is anything else I could try?
Thank you,
Paul
Last night I had a power failure. Now, upon rebooting the box (FreeNAS v9.2.1) I got (screenshot_3.jpg):
Code:
panic: solaris assert: 0 == dmu_bonus_hold(os, object, dl, &dl->dl_dbuf) (0x0 == 0x2)
Rebooting the box or swapping the USB key (I tried FreeNAS v9.2.0) shows the same errors.
The hardware: FreeNAS v9.2.1, CPU Intel i3 3225, 16 GB RAM, HDD WD Red 3TB x 2, WD Re3 x1 TB
Pool layout:
tank0 with 2 HDDs in RAID 1, 10 datasets, ~ 50% full
tank1 with a 1 HDD, 1 dataset, ~ 15% full
Compression (lz4) enabled on tank0 and inherited by all the datasets.
Scrubbing set to run once every 15 days, and SMART tests once a month.
There are no errors/repairs reported by the last scrub (or any other scrub) on both pools.
I'm pretty much stuck.
I'll try with the latest version of FreeNAS and report back. Is anything else I could try?
Thank you,
Paul