profwalken
Patron
- Joined
- Nov 19, 2013
- Messages
- 410
Hi,
I get that kind of messages in console:
What is ada0p3 ? is it the swap disk ? if so what to do to fix this ?
Thanks for any advices
I get that kind of messages in console:
Code:
Apr 3 10:24:56 SRV 1 2023-04-03T10:24:56.582653+02:00 SRV.local savecore 22625 - - /dev/ada0p3: Operation not permitted Apr 3 10:24:56 SRV ada2 at ahcich9 bus 0 scbus5 target 0 lun 0 Apr 3 10:24:56 SRV ada2: <ST2000VN004-2E4164 SC60> ACS-2 ATA SATA 3.x device Apr 3 10:24:56 SRV ada2: Serial Number Z52C02J8 Apr 3 10:24:56 SRV ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 3 10:24:56 SRV ada2: Command Queueing enabled Apr 3 10:24:56 SRV ada2: 1907729MB (3907029168 512 byte sectors) Apr 3 10:24:56 SRV 1 2023-04-03T10:24:56.763957+02:00 SRV.local savecore 22639 - - /dev/ada0p3: Operation not permitted Apr 4 00:00:00 SRV syslog-ng[1202]: Configuration reload request received, reloading configuration; Apr 4 00:00:00 SRV syslog-ng[1202]: Configuration reload finished; Apr 5 00:00:00 SRV syslog-ng[1202]: Configuration reload request received, reloading configuration; Apr 5 00:00:00 SRV syslog-ng[1202]: Configuration reload finished; Apr 5 01:21:12 SRV ada2 at ahcich9 bus 0 scbus5 target 0 lun 0 Apr 5 01:21:12 SRV ada2: <ST2000VN004-2E4164 SC60> s/n Z52C02J8 detached Apr 5 01:21:12 SRV (ada2:ahcich9:0:0:0): Periph destroyed Apr 5 01:31:41 SRV 1 2023-04-05T01:31:41.665922+02:00 SRV.local savecore 46315 - - /dev/ada0p3: Operation not permitted Apr 5 01:31:41 SRV ada2 at ahcich9 bus 0 scbus5 target 0 lun 0 Apr 5 01:31:41 SRV ada2: <ST2000VN004-2E4164 SC60> ACS-2 ATA SATA 3.x device Apr 5 01:31:41 SRV ada2: Serial Number Z52C02J8 Apr 5 01:31:41 SRV ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 5 01:31:41 SRV ada2: Command Queueing enabled Apr 5 01:31:41 SRV ada2: 1907729MB (3907029168 512 byte sectors) Apr 5 01:31:41 SRV 1 2023-04-05T01:31:41.841501+02:00 SRV.local savecore 46329 - - /dev/ada0p3: Operation not permitted
What is ada0p3 ? is it the swap disk ? if so what to do to fix this ?
Thanks for any advices