Hey,
Got this message overnight from my TrueNAS box.
Pool Tank state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
2021-10-01 04:10:19 (Europe/London)
Tank is showing as ONLINE (Unhealthy) (X)
Tank Status:
Ran a Short SMART Test on da3 (I do run these reguarly and have had no failures) and got this output (ignore the previous run cancelled by host, I initially did a long test but realised it was going to take hours, cancelled and did a short smart test to get some data quickly)
This drive is a WD Red 8TB drive that I bought at the beginning of 2017, so it's approaching 5 years old now.
So I assume the drive is probably starting to show it's age and is beginning to start it's decline, so what are my next steps? Is it worth me running an extended SMART test at this stage? Am I best just replacing it? In regards to replacing it, this drive is part of an early mirror VDEV, so I'm probably best replacing it with a new HDD that I'm now using on other VDEVs, the EXOS 16TB, I'll be able to replace this drive with that won't I, but I won't benefit from the additional capacity of the drive until I replace the other HDD in it's VDEV with the EXOS 16TB?
Thanks!
Got this message overnight from my TrueNAS box.
Pool Tank state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
2021-10-01 04:10:19 (Europe/London)
Tank is showing as ONLINE (Unhealthy) (X)
Tank Status:
Code:
Name Read Write Checksum Status Tank 0 0 0 ONLINE MIRROR 0 0 0 ONLINE da4p2 0 0 0 ONLINE da3p2 0 0 13 ONLINE MIRROR 0 0 0 ONLINE da2p2 0 0 0 ONLINE da0p2 0 0 0 ONLINE MIRROR 0 0 0 ONLINE da5p2 0 0 0 ONLINE da1p2 0 0 0 ONLINE MIRROR 0 0 0 ONLINE da7p2 0 0 0 ONLINE da6p2 0 0 0 ONLINE
Ran a Short SMART Test on da3 (I do run these reguarly and have had no failures) and got this output (ignore the previous run cancelled by host, I initially did a long test but realised it was going to take hours, cancelled and did a short smart test to get some data quickly)
Code:
# smartctl -a /dev/da3 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p9 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD80EFZX-68UW8N0 Serial Number: VK0HH33Y LU WWN Device Id: 5 000cca 3b7c70a40 Firmware Version: 83.H0A83 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Oct 13 14:08:31 2021 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1083) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 116 3 Spin_Up_Time 0x0007 156 156 024 Pre-fail Always - 457 (Average 387) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 41 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 40809 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 41 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3160 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3160 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 17/38) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40809 - # 2 Extended offline Aborted by host 90% 40809 - # 3 Short offline Completed without error 00% 40774 - # 4 Extended offline Completed without error 00% 40715 - # 5 Short offline Completed without error 00% 40606 - # 6 Short offline Completed without error 00% 40390 - # 7 Extended offline Completed without error 00% 40325 - # 8 Short offline Completed without error 00% 40223 - # 9 Short offline Completed without error 00% 40055 - #10 Extended offline Completed without error 00% 39989 - #11 Short offline Completed without error 00% 39887 - #12 Short offline Completed without error 00% 39647 - #13 Extended offline Completed without error 00% 39585 - #14 Short offline Completed without error 00% 39479 - #15 Short offline Completed without error 00% 39311 - #16 Extended offline Completed without error 00% 39243 - #17 Short offline Completed without error 00% 39143 - #18 Short offline Completed without error 00% 38903 - #19 Extended offline Completed without error 00% 38837 - #20 Short offline Completed without error 00% 38735 - #21 Short offline Completed without error 00% 38567 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
This drive is a WD Red 8TB drive that I bought at the beginning of 2017, so it's approaching 5 years old now.
So I assume the drive is probably starting to show it's age and is beginning to start it's decline, so what are my next steps? Is it worth me running an extended SMART test at this stage? Am I best just replacing it? In regards to replacing it, this drive is part of an early mirror VDEV, so I'm probably best replacing it with a new HDD that I'm now using on other VDEVs, the EXOS 16TB, I'll be able to replace this drive with that won't I, but I won't benefit from the additional capacity of the drive until I replace the other HDD in it's VDEV with the EXOS 16TB?
Thanks!