Tag Leute,
habe mir eine NFS Freigabe für die Backups der VMs von der ESXi eingerichtet, welche ich mit ghettoVCB übertrage. Die Übertragung ist grottenschlecht bzw. sehr langsam. Es liegt daran das NFS Freigabe auf sync steht. Laut diesem Beitrag http://vmware-forum.de/viewtopic.php?t=29853 wurde auf "async" gestellt und damit das Problem der langsamen Übertragung gelöst.
Leider finde ich nirgendwo unter FreeNAS 9.2 die Einstellungen zu sync / async?? Jemand ein Rat?
habe mir eine NFS Freigabe für die Backups der VMs von der ESXi eingerichtet, welche ich mit ghettoVCB übertrage. Die Übertragung ist grottenschlecht bzw. sehr langsam. Es liegt daran das NFS Freigabe auf sync steht. Laut diesem Beitrag http://vmware-forum.de/viewtopic.php?t=29853 wurde auf "async" gestellt und damit das Problem der langsamen Übertragung gelöst.
Leider finde ich nirgendwo unter FreeNAS 9.2 die Einstellungen zu sync / async?? Jemand ein Rat?
Code:
[root@NAS] /boot# zfs get sync volume/test NAME PROPERTY VALUE SOURCE volume/test sync standard default
Code:
[root@NAS] /boot# zfs get sync=disabled volume/test bad property list: invalid property 'sync=disabled' usage: get [-rHp] [-d max] [-o "all" | field[,...]] [-t type[,...]] [-s source[,...]] <"all" | property[,...]> [filesystem|volume|snapshot] ... The following properties are supported: PROPERTY EDIT INHERIT VALUES available NO NO <size> clones NO NO <dataset>[,...] compressratio NO NO <1.00x or higher if compressed> creation NO NO <date> defer_destroy NO NO yes | no logicalreferenced NO NO <size> logicalused NO NO <size> mounted NO NO yes | no origin NO NO <snapshot> refcompressratio NO NO <1.00x or higher if compressed> referenced NO NO <size> type NO NO filesystem | volume | snapshot | bookmark used NO NO <size> usedbychildren NO NO <size> usedbydataset NO NO <size> usedbyrefreservation NO NO <size> usedbysnapshots NO NO <size> userrefs NO NO <count> written NO NO <size> aclinherit YES YES discard | noallow | restricted | passthrough | passthrough-x aclmode YES YES discard | groupmask | passthrough | restricted atime YES YES on | off canmount YES NO on | off | noauto casesensitivity NO YES sensitive | insensitive | mixed checksum YES YES on | off | fletcher2 | fletcher4 | sha256 compression YES YES on | off | lzjb | gzip | gzip-[1-9] | zle | lz4 copies YES YES 1 | 2 | 3 dedup YES YES on | off | verify | sha256[,verify] devices YES YES on | off exec YES YES on | off jailed YES YES on | off logbias YES YES latency | throughput mlslabel YES YES <sensitivity label> mountpoint YES YES <path> | legacy | none nbmand YES YES on | off normalization NO YES none | formC | formD | formKC | formKD primarycache YES YES all | none | metadata quota YES NO <size> | none readonly YES YES on | off recordsize YES YES 512 to 128k, power of 2 refquota YES NO <size> | none refreservation YES NO <size> | none reservation YES NO <size> | none secondarycache YES YES all | none | metadata setuid YES YES on | off sharenfs YES YES on | off | share(1M) options sharesmb YES YES on | off | sharemgr(1M) options snapdir YES YES hidden | visible sync YES YES standard | always | disabled utf8only NO YES on | off version YES NO 1 | 2 | 3 | 4 | 5 | current volblocksize NO YES 512 to 128k, power of 2 volmode YES YES default | geom | dev | none volsize YES NO <size> vscan YES YES on | off xattr YES YES on | off userused@... NO NO <size> groupused@... NO NO <size> userquota@... YES NO <size> | none groupquota@... YES NO <size> | none written@<snap> NO NO <size> Sizes are specified in bytes with standard units such as K, M, G, etc. User-defined properties can be specified by using a name containing a colon (:). The {user|group}{used|quota}@ properties must be appended with a user or group specifier of one of these forms: POSIX name (eg: "matt") POSIX id (eg: "126829") SMB name@domain (eg: "matt@sun") SMB SID (eg: "S-1-234-567-89") [root@NAS] /boot#
Last edited: