marian78
Patron
- Joined
- Jun 30, 2011
- Messages
- 210
Hi,
need help wit my server log, because i dont know what does it mean...
i have instaled Freenas v9.2.1.7 x64 on Supermicro server SSG-6037R-E1R16L 3U DP.
When i restart or start server i got email with this:
"Fixed Direct Access SCSI-6 device"
This means that i have any problems with the controller? Need flash firmware to LSI card?
email server log:
I want to thank you in advance for your help.
Marian.
edit: i atteched output from sas2flash -listall
need help wit my server log, because i dont know what does it mean...
i have instaled Freenas v9.2.1.7 x64 on Supermicro server SSG-6037R-E1R16L 3U DP.
When i restart or start server i got email with this:
"Fixed Direct Access SCSI-6 device"
This means that i have any problems with the controller? Need flash firmware to LSI card?
email server log:
Code:
fileserver2.workgroup kernel log messages: > igb0: Ethernet address: 00:25:90:ca:3b:30 > igb1: Ethernet address: 00:25:90:ca:3b:31 > igb2: Ethernet address: 00:25:90:ca:3b:32 > igb3: Ethernet address: 00:25:90:ca:3b:33 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > ses0 at mps0 bus 0 scbus0 target 15 lun 0 > ses0: <LSI SAS2X28 0e12> Fixed Enclosure Services SCSI-5 device > da0: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da0: Serial Number WD-WCC4E1140612 > da0: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da1: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da1: Serial Number WD-WCC4E1140618 > da1: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da2: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da2: Serial Number WD-WCC4E1146619 > da2: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da3: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da3: Serial Number WD-WCC4E1184479 > da3: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da4: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da4: Serial Number WD-WCC4E1146088 > da4: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da5: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da5: Serial Number WD-WCC4E1081054 > da5: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > da6: <ATA WDC WD40EFRX-68W 0A80> Fixed Direct Access SCSI-6 device > da6: Serial Number WD-WCC4E1155638 > da6: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C) > SMP: AP CPU #1 Launched! > Timecounter "TSC-low" frequency 1250027244 Hz quality 1000 > Root mount waiting for: usbus1 usbus0 > Root mount waiting for: usbus1 usbus0 > uhid0: <American Power Conversion Smart-UPS 1500 FWUPS 08.3 ID18, class 0/0, rev 2.00/1.06, addr 3> on usbus1 > ugen1.4: <Generic> at usbus1 > umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.03, addr 4> on usbus1 > umass0: SCSI over Bulk-Only; quirks = 0x4101 > da7 at umass-sim0 bus 0 scbus8 target 0 lun 0 > da7: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device > da7: Serial Number 9381EB25 > da7: 40.000MB/s transfers > da7: 3901MB (7989248 512 byte sectors: 255H 63S/T 497C) > da7: quirks=0x2<NO_6_BYTE> > vboxdrv: fAsync=0 offMin=0x30e offMax=0xe12 > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c42c > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c42d > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c42e > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c42f > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c430 > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c431 > ses0: phy 0: parent 5003048000e7c43f addr 5003048000e7c432 > igb3: link state changed to DOWN > igb1: link state changed to DOWN > igb0: link state changed to DOWN > igb2: link state changed to DOWN > lagg0: link state changed to DOWN > igb2: link state changed to UP > lagg0: link state changed to UP > igb1: link state changed to UP > igb0: link state changed to UP > igb3: link state changed to UP > igb2: link state changed to DOWN > igb3: link state changed to DOWN > igb1: link state changed to DOWN > igb0: link state changed to DOWN > lagg0: link state changed to DOWN > igb0: link state changed to UP > lagg0: link state changed to UP > igb2: link state changed to UP > igb1: link state changed to UP > igb3: link state changed to UP -- End of security output --
I want to thank you in advance for your help.
Marian.
edit: i atteched output from sas2flash -listall
Attachments
Last edited: