Tominaattori
Cadet
- Joined
- Aug 1, 2017
- Messages
- 5
Hello fellow datahoarders! I recently bought an used ibm server and created a zfs pool using 4* 8tb wd reds. The disks are connected to a crossflashed dell h200E with an externalSAS to sata- hackjob. Now I finally got a hold of a proper diskshelf and I am worried what would happen if I just popped the disks in the shelf and hoped for the best. I spent countless of hours configuring all the jails and ssl stuff and losing any of them would be devastating (not even mentioning the data).
Has any of you done this before? Will the pool need exporting and importing as they essentially will be connected to the same hba card? Will this export/import job preserve my jails also?
Also I'm guessing that the sata 1M cable lenght limitation does not apply here since the HB-1235 obviously has an expander (or does it?)? It has 12 bays and with dual channel hba only 8 would be possible. Am I on a right track on this one?
I'm running freenas 11
Any help would be highly appreciated!
Ibm x3850 quad x7460
128gb ram
Xyratex compellent HB-1235
Lähetetty minun Nexus 6P laitteesta Tapatalkilla
Has any of you done this before? Will the pool need exporting and importing as they essentially will be connected to the same hba card? Will this export/import job preserve my jails also?
Also I'm guessing that the sata 1M cable lenght limitation does not apply here since the HB-1235 obviously has an expander (or does it?)? It has 12 bays and with dual channel hba only 8 would be possible. Am I on a right track on this one?
I'm running freenas 11
Any help would be highly appreciated!
Ibm x3850 quad x7460
128gb ram
Xyratex compellent HB-1235
Lähetetty minun Nexus 6P laitteesta Tapatalkilla