Hi,
I'm new to freenas. I have some usb hard drive formatted with ExtFAT and FAT32
Now I want to get at the data with my freenas by mounting them on usb2. The problem doesn't seem to be new. Still the threads I've found didn't solved my problem, as they mostly use NTFS.
Although its possible to copy the data via network, the the transfer speed is like 10 MB/s, witch I would like to avoid.
So this is what I tried:
--------------------------------------------------------------------------------
1) tried to mount a flash disk with FAT32 on the root shell
# mkdir /mnt/usb
# mount -t vfat /dev/da1s1 /mnt/usb/
mount: /dev/da1s1: Operation not supported by device
2) tried to install fusefs-exfat and mount a flash disk with ExtFAT from inside a jail
Jail ‣ Add Jail
Jail ‣ View Jails ‣ Shell
#pkg install fusefs-kmod
Installed packages to be UPGRADED:
pkg: 1.4.12 -> 1.6.1_1
New packages to be INSTALLED:
fusefs-kmod: 0.263233_1,1
# cd /usr/ports/sysutils/fusefs-exfat; make install clean
===> Applying FreeBSD patches for py27-setuptools27-5.5.1_1
Ignoring previously applied (or reversed) patch.
2 out of 2 hunks ignored--saving rejects to pkg_resources.py.rej
=> Patch patch-pkg_resources failed to apply cleanly.
*** [do-patch] Error code 1
Stop in /usr/ports/devel/py-setuptools27.
*** [build-depends] Error code 1
Stop in /usr/ports/devel/scons.
*** [build-depends] Error code 1
Stop in /usr/ports/sysutils/fusefs-exfat.
--------------------------------------------------------------------------------
So my question is now: How can I mount the drives? And does someone know how to compile the fusefs-exfat on freenas 9.3-RELEASE-p25.
Additional could I use the fusefs-exfat drivers from outside of the jail? Or would I had to mount the drive from inside?
Thanks in advance.
I'm new to freenas. I have some usb hard drive formatted with ExtFAT and FAT32
Now I want to get at the data with my freenas by mounting them on usb2. The problem doesn't seem to be new. Still the threads I've found didn't solved my problem, as they mostly use NTFS.
Although its possible to copy the data via network, the the transfer speed is like 10 MB/s, witch I would like to avoid.
So this is what I tried:
--------------------------------------------------------------------------------
1) tried to mount a flash disk with FAT32 on the root shell
# mkdir /mnt/usb
# mount -t vfat /dev/da1s1 /mnt/usb/
mount: /dev/da1s1: Operation not supported by device
2) tried to install fusefs-exfat and mount a flash disk with ExtFAT from inside a jail
Jail ‣ Add Jail
Jail ‣ View Jails ‣ Shell
#pkg install fusefs-kmod
Installed packages to be UPGRADED:
pkg: 1.4.12 -> 1.6.1_1
New packages to be INSTALLED:
fusefs-kmod: 0.263233_1,1
# cd /usr/ports/sysutils/fusefs-exfat; make install clean
===> Applying FreeBSD patches for py27-setuptools27-5.5.1_1
Ignoring previously applied (or reversed) patch.
2 out of 2 hunks ignored--saving rejects to pkg_resources.py.rej
=> Patch patch-pkg_resources failed to apply cleanly.
*** [do-patch] Error code 1
Stop in /usr/ports/devel/py-setuptools27.
*** [build-depends] Error code 1
Stop in /usr/ports/devel/scons.
*** [build-depends] Error code 1
Stop in /usr/ports/sysutils/fusefs-exfat.
--------------------------------------------------------------------------------
So my question is now: How can I mount the drives? And does someone know how to compile the fusefs-exfat on freenas 9.3-RELEASE-p25.
Additional could I use the fusefs-exfat drivers from outside of the jail? Or would I had to mount the drive from inside?
Thanks in advance.