KoreanJesus
Dabbler
- Joined
- Jun 17, 2014
- Messages
- 19
Hi all,
Looking to get some feedback on my Zpool setup
I'm in the process of setting up a new FreeNAS build and i have two sets of drives to use
-6 x 2TB WD RE4 64mb 7200rpm
-4 x 2TB WD RED 64mb 5400rpm
I had two ideas for config
1.
Zpool 1 7.3TB
6x 2TB RE4s RaidZ2
Zpool 2 = 3.6TB
4x 2TB REDs RaidZ2 + Encryption
2. (Not sure if mixing the drives is a good idea)
10x 2TB Mix RaidZ2 + Encryption
Has anybody got any thoughts on mixing drives with different speeds
Also if anybody else can recommend a better setup that would be great
Cheers.
Looking to get some feedback on my Zpool setup
I'm in the process of setting up a new FreeNAS build and i have two sets of drives to use
-6 x 2TB WD RE4 64mb 7200rpm
-4 x 2TB WD RED 64mb 5400rpm
I had two ideas for config
1.
Zpool 1 7.3TB
6x 2TB RE4s RaidZ2
Zpool 2 = 3.6TB
4x 2TB REDs RaidZ2 + Encryption
2. (Not sure if mixing the drives is a good idea)
10x 2TB Mix RaidZ2 + Encryption
Has anybody got any thoughts on mixing drives with different speeds
Also if anybody else can recommend a better setup that would be great
Cheers.