Hello,
I am upgrading my Freenas 11.0 Freenas box from 2GB drives to 3GB drives. The box has six drives. Swapping the first five drives went well, but when I swap the last drive, the 'Member Disk' dropdown is empty. I've tried various tricks from other posts, but the member disk drop down is not populated.
The process I follow is:
1) Take the target drive offline via the GUI
2) Shutdown the box
3) Install the new drive
4) Restart the box
5) Login to the 'OLD" UI
6) Navigate to the Volumes Menu
7) Select the new drive (listed as offline) and change to online
8) Select the 'Replace' icon
9) The popup appears, but the 'Member Disk' dropdown is empty.
I have seen this issue referenced in earlier threads and have tried a variety of recommendations to resolve the issue, but I have not had any success.
Is there a known walk work around to the issue?
The zpool status -v is appended.
Thanks,
Steve
[root@seaneynas01 ~]# zpool status -v
pool: Storage
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 0 in 5h49m with 0 errors on Mon Sep 18 02:58:11 2017
config:
NAME STATE READ WRITE CKSUM
Storage DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
12979303527599269488 UNAVAIL 0 0 0 was /dev/ada0p2
gptid/88319682-9a25-11e7-872f-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/b1572123-9aa0-11e7-b280-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/cff2b51c-9748-11e7-83dd-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/eabd30dd-92ab-11e7-bac7-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/95d5ffea-923a-11e7-a9e2-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h5m with 0 errors on Fri Sep 15 03:50:30 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors
[root@seaneynas01 ~]#
I am upgrading my Freenas 11.0 Freenas box from 2GB drives to 3GB drives. The box has six drives. Swapping the first five drives went well, but when I swap the last drive, the 'Member Disk' dropdown is empty. I've tried various tricks from other posts, but the member disk drop down is not populated.
The process I follow is:
1) Take the target drive offline via the GUI
2) Shutdown the box
3) Install the new drive
4) Restart the box
5) Login to the 'OLD" UI
6) Navigate to the Volumes Menu
7) Select the new drive (listed as offline) and change to online
8) Select the 'Replace' icon
9) The popup appears, but the 'Member Disk' dropdown is empty.
I have seen this issue referenced in earlier threads and have tried a variety of recommendations to resolve the issue, but I have not had any success.
Is there a known walk work around to the issue?
The zpool status -v is appended.
Thanks,
Steve
[root@seaneynas01 ~]# zpool status -v
pool: Storage
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 0 in 5h49m with 0 errors on Mon Sep 18 02:58:11 2017
config:
NAME STATE READ WRITE CKSUM
Storage DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
12979303527599269488 UNAVAIL 0 0 0 was /dev/ada0p2
gptid/88319682-9a25-11e7-872f-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/b1572123-9aa0-11e7-b280-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/cff2b51c-9748-11e7-83dd-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/eabd30dd-92ab-11e7-bac7-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/95d5ffea-923a-11e7-a9e2-3497f69b9cd4 ONLINE 0 0 0 block size: 512B configured, 4096B native
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h5m with 0 errors on Fri Sep 15 03:50:30 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors
[root@seaneynas01 ~]#
Last edited:
