Alan Smithee
Dabbler
- Joined
- Feb 24, 2015
- Messages
- 13
Running FreeNAS 9.3 on a M5A78L-M/USB3 with an AMD FX-6300.
I'd like to be able to monitor (or at least see) the cpu temperature. I tried a few commands, but none of them have the info I need. I know the temperature sensors are working because I can see them in the BIOS. Any ideas on what other drivers/tools might be able to get at that info (mbmon maybe?)
I can see this could be a AMD issue, but was hoping someone might have some other advice or had some success.
Thanks
I'd like to be able to monitor (or at least see) the cpu temperature. I tried a few commands, but none of them have the info I need. I know the temperature sensors are working because I can see them in the BIOS. Any ideas on what other drivers/tools might be able to get at that info (mbmon maybe?)
Code:
# sysctl -a | grep -i temp device amdtemp device coretemp net.inet6.ip6.use_tempaddr: 0 net.inet6.ip6.temppltime: 86400 net.inet6.ip6.tempvltime: 604800 net.inet6.ip6.prefer_tempaddr: 0 hw.usb.template: 0 kstat.zfs.misc.zcompstats.attempts: 23778849
Code:
#sysctl -a | grep -i cpu hw.ncpu: 6 hw.acpi.cpu.cx_lowest: C1 security.jail.param.cpuset.id: 0 dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.P001 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 3500 dev.cpu.0.freq_levels: 3500/13920 3062/12180 3000/10457 2625/9149 2500/7585 2187/6636 2000/5250 1750/4593 1500/3937 1400/3052 1225/2670 1050/2289 875/1907 700/1526 525/1144 350/763 175/381 dev.cpu.0.cx_supported: C1/1/0 C2/2/100 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% 0.00% last 270us ... snip ...
I can see this could be a AMD issue, but was hoping someone might have some other advice or had some success.
Thanks