Erik Carlson
Dabbler
- Joined
- Aug 2, 2012
- Messages
- 19
Hello,
I have just upgraded from 8.0.4 to 8.3.0p1.
Everything appears to work however I have lost some swap.
I have 3 drives in the machine
/dev/ada0 is a 3TB drive which is not associated with any other drives
/dev/ada1 & /dev/ada2 are both 1TB drives which are mirrored and these are the drives i use every day.
all 3 drives have a 2GB swap partition. The machine itself has 16GB of real RAM.
I upgraded in place from 8.0.4 to 8.3.0p1 using a cd of the 64bit iso.
I have not upgraded the zfs format yet in case I have to roll back.
swapinfo shows:
[root@freenas ~]# swapinfo
Device 512-blocks Used Avail Capacity
/dev/ada1p1 4194304 0 4194304 0%
/dev/ada2p1 4194304 0 4194304 0%
Total 8388608 0 8388608 0%
so it appears to be ignoring the 2GB swap on /dev/ada0p1 ?
I can access the data on /dev/ada0p2 just fine.
I can't see anything in the freenas manual about mucking around with existing swap, only settings for new disks which this is not.
Any ideas?
Thanks
Erik
I have just upgraded from 8.0.4 to 8.3.0p1.
Everything appears to work however I have lost some swap.
I have 3 drives in the machine
/dev/ada0 is a 3TB drive which is not associated with any other drives
/dev/ada1 & /dev/ada2 are both 1TB drives which are mirrored and these are the drives i use every day.
all 3 drives have a 2GB swap partition. The machine itself has 16GB of real RAM.
I upgraded in place from 8.0.4 to 8.3.0p1 using a cd of the 64bit iso.
I have not upgraded the zfs format yet in case I have to roll back.
swapinfo shows:
[root@freenas ~]# swapinfo
Device 512-blocks Used Avail Capacity
/dev/ada1p1 4194304 0 4194304 0%
/dev/ada2p1 4194304 0 4194304 0%
Total 8388608 0 8388608 0%
so it appears to be ignoring the 2GB swap on /dev/ada0p1 ?
I can access the data on /dev/ada0p2 just fine.
I can't see anything in the freenas manual about mucking around with existing swap, only settings for new disks which this is not.
Any ideas?
Thanks
Erik